DODGE RAM FORUM banner

Factory installed inverter not working

6K views 2 replies 3 participants last post by  TruckeeT2 
#1 ·
Anyone have any suggestions........I have a 2012 Sport with the 150w inverter installed on the dash. I tried to use it for the 1st time today and it does not appear to work. I plugged in a cell phone to charge and nothing, I hit the inverter button and it turns yellow then turns off within a couple of seconds. Followed instructions to resent, checked the fuse and it still does the same thing, comes on for a second then turns off by itself...any suggestions???

THanks
 
#2 ·
if the fuse is good, and it comes on for a second or two, then shuts off, sounds like there is something jacked up on the inverter box itself....

I don't know if it has a reset on the box or not.

Seeing as it's a new truck, I'd take it to the stealership, and let them fix the problem. This is not something that you should have to deal with.

good luck

Exco
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top