#1
·
I've been searching all over and I can't find out how to remove the drivers side door window. Anyone know how to do this?
Thanks
#2
·
It's relatively simple.
Remove the interior door panel.
Roll the window down about 1/2 way and get the two 10mm nuts lined up with the access holes.
Take off the two 10 mm nuts that hold the lower window track to the window regulator.
Roll the regulator down the rest of the way.
Push down on the front of the window glass while lifting the back to turn it sideways (up and down).
Lift it out of the door from the outside.
#3
·
Thanks for your reply! Gonna head back out in a few and give it a try.
#4
·
That was pretty simple. Thanks again for taking the time to help me out! :smileup:
#5
·
What, you didn't want to just use a brick? Whimp!
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.