DODGE RAM FORUM banner

uconnect module bad

Tags
2012 uconnect
4K views 3 replies 2 participants last post by  GTyankee 
#1 · (Edited)
Last week I left my windows down a little and we had a HARD blowing rain. water ran down the inside the dash on the passenger side and 1 drop got in the UC module. It died today and I pulled it out, this is how I saw the water damage and know that was when it happened.

Anyway, the number on the module is 68104909AC and is really all I need. I found some on ebay http://www.ebay.com/itm/7-14-DODGE-...Parts_Accessories&hash=item5b0482d802&vxp=mtr but that is for the whole kit which I don't need. Does anyone know if I can order the module by itself? and also since I already have the sales code option in there should it just be plug and play without having to go to the dealer??

ETA: I have the RHB radio so the uconnect module is mounted behind the lower glove box.
 
#2 ·
I believe the RHB 430N, RBZ 430, REN 430, & the RES 130s radio that has the VR & Phone hard key all use the same external Uconnect module

I know that the RES 130 radio without those hard keys, will not work
I also know that the RER 730N & RHR 730N both have Internal Uconnect modules

If you look at the following website, you will see what modules will work for you, there is also a lot of other information on the site & i believe the radio manual is available online
http://oemautopartsco.com/collectio...-1500-2500-3500-gps-navigation-rhb-430n-radio

also check today's posts in the members For Sale section , i believe that i saw a Uconnect module posted


if you have not sent for your Rams Build Sheet, go to this site & click on EQUIPMENT LISTING
http://www.ramtrucks.com/webselfservice/ram/
 
#3 ·
just as an update, I ordered the part from justparts and it plugged in and worked. all I had to do was delete the uconnect device from my phone and pair with the new uconnect. I was worried this would be a box tied to a specific VIN, but it worked flawless. it even came with the same HW/FW numbers as my original, now I just need to do the UC update to fix the streaming audio problems I used to have.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top