DODGE RAM FORUM banner

same old same old!

668 views 4 replies 3 participants last post by  rancherman 
#1 ·
got the new fuel pump sitting here still in the box.
seems that those pesky little 'roll over' valves attacthed to the old pump, (you know the one's that need to be transferred onto the new pump) are very well attached to that hard rubber line. :(
(another run to the dealer for my recklessness...)

Also finding my arms are not long enough to hold an electrical connector far enough away to focus on!! (time to snag my magnifier glasses from the house!)

at least it warmed up to almost 32 today...not so bad laying on the concrete today!

hopefully tonight will have it running again!
 
#2 ·
its almost easier to unbolt the bed of the truck & work on the gas tank from above any more, especially if the tank is close to full
 
#4 ·
Couldn't slice the rubber hose and replace it? :D
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top