Hello all I'm a newbie to the forum and was looking for some advise. I have a 1997 Dodge Indy Pace truck that has been suffering from head gasket failures. It's been in storage for about 5 yrs now and I'm thinking of fixing it back up. Here's my issue, the motor is build with low compression blower pistons, cams, Procharger and NOS. The truck isn't raced and barely beat on. It will not stop leaking coolant into the oil. I know it's not excessive boost, I've checked angle on head to block and intake contact and always made sure the blower head gaskets are torqued properly. I'm not a big Dodge fan, so I'm not really sure of any issues they may have. The last two times I did not find and issue with the head gaskets.
I've also used a smoke machine to look for possibilities for damage or leakage. I'll be in the process of removing the motor, I hate to trash the motor because it does not have a ton of mileage on it and it's been set up with the good pistons etc.
Any suggestions would be appreciated. Thank you in advance!
I've also used a smoke machine to look for possibilities for damage or leakage. I'll be in the process of removing the motor, I hate to trash the motor because it does not have a ton of mileage on it and it's been set up with the good pistons etc.
Any suggestions would be appreciated. Thank you in advance!