Hi guys I'm new here
I replaced my drivers door latch because my door ajar light was staying on. I replace the latch and close the door to make sure everything is working and all is good.
Next I put the door panel back on and hook up the connectors for pw, pl and mirrors. When I close the door the door ajar light and interior lights are still staying on.
I pulled the connector off the new latch thats in the truck and hooked up the old latch and seated it on the door striker. The door ajar went out if the pw switch was not hook up. (same as the new latch) which means the original latch was fine.
Why would the pw switch cause a door ajar light?
If I hold one the window switches the light will go off.
I talked to a service tech at the dealer who thought it could be bad wiring somewhere. Maybe in the drivers side floor by the inside fuse box.
Could that whole drivers side pw/pl/pm switch be bad and causing this? Anyway to test that?
Thanks for your help guys.
Right now its all back together and I have just disconnected the power windows so everything else is working.
I replaced my drivers door latch because my door ajar light was staying on. I replace the latch and close the door to make sure everything is working and all is good.
Next I put the door panel back on and hook up the connectors for pw, pl and mirrors. When I close the door the door ajar light and interior lights are still staying on.
I pulled the connector off the new latch thats in the truck and hooked up the old latch and seated it on the door striker. The door ajar went out if the pw switch was not hook up. (same as the new latch) which means the original latch was fine.
Why would the pw switch cause a door ajar light?
If I hold one the window switches the light will go off.
I talked to a service tech at the dealer who thought it could be bad wiring somewhere. Maybe in the drivers side floor by the inside fuse box.
Could that whole drivers side pw/pl/pm switch be bad and causing this? Anyway to test that?
Thanks for your help guys.
Right now its all back together and I have just disconnected the power windows so everything else is working.