DODGE RAM FORUM banner

Headliner removal

7K views 4 replies 3 participants last post by  DonJohnny 
#1 ·
Has anyone here removed their headliner? If so, what is the procedure? Next warm day I all be installing my clearance lights.
 
#4 ·
I didn't remove the entire headliner, I just lowered the front enough to do what I had to.

Simply removed the sunvisors (10mm socket required) and clips (Torx T-20 required), and the plastic trim on the A-pillars(8mm socket required). And I was able to pull it down 6-8 inches.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top