Ok I have a 2012 Ram 1500 and I'm looking to replace my dog lights with rigid pod lights http://www.rigidindustries.com/mounting-options/46510
there will be 4 lights all together. My question is, how can I wore all 4 to one switch (if I use a 3 position switch) so that only two work on one side of the switch and all four come on on the other side of the switch. I don't have a lot of room for multiple switches so I would prefer to use only one switch. I know how to wire them if I were only using one set of light but not sure how to wire both sets without all 4 coming on no matter what. Any help would be greatly appreciated!