DODGE RAM FORUM banner

dies while driving

2K views 4 replies 3 participants last post by  RamTech 
#1 ·
My 1996 Dodge Ram started to stall while driving, no warning, engine just dies, usually on flat surfaces, and while cruising along at 45-55 MPH. It starts right back up usually. When it dies I usally coast off to the side and stop when I start her right back up. And when I hooked up an OBD II reader there are no error codes.

So far I only replaced the IAC and cleaned the throttle body, I checked the MAP Sensor, and the TPS sensor, they seem to be working like they are designed to do. I also checked the ASD and Fuel Pump Relay and they are at the specified meter readings. Listened to the fuel pump and that seemed to charge in tthe 3-5 second specifications.

Any help would be greatly appreciated!!:4-dontknow:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top