I realize there is another post on this but wanted to see if we can have a thread we can chime in on as dealers start getting parts to fix this issue. I got my notice from Chrysler in April in the mail and still no parts here in my area. I have called Chrysler Customer Service and got the run around.
This interim notification letter is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Chrysler has decided that a defect, which relates to motor vehicle safety, exists in some 2009 model year Chrysler Aspen and Dodge Durango vehicles; and 2009 through 2012 model year Dodge Dakota and Ram 1500 series trucks equipped with a 9.25" rear axle.
The problem is...
The rear axle pinion nut on your truck (VIN: xxx) may have
without an adhesive patch on the pinion nut threads. The lack of this
adhesive patch could allow the rear axle pinion nut to loosen and/or the rear
driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Either situation could cause a crash without warning.
Chrysler intends to repair your vehicle free of charge (parts and labor). Parts required to provide a permanent remedy for this condition are currently not available. Chrysler will contact you again by mail, with a follow-up recall notice, when the remedy parts are available.