When I finished my oil change and while my truck was still on the ramps I took a look at that front air dam that I hate so much. So I got to work and removed it...
But I didnt like the bolts and other stuff that was visible on the bottom of the bumper. So I started thinking... I took my roll of 2" blue tape and marked the top edge of the air dam. Then using it as a guide I started cutting with my jig saw.
When I was done cutting I took my file and cleaned up the cut. I left the tape on so I wouldn't mark up the air dam from filing.
Then reinstalled it back on the truck. Much better if you ask me.
No more ugly air dam, or exposed bolts and other things.