Procomp message regarding their level kit in 2013-14 ram
I just received this in my email from procomp.
They tried to tell me 6 months ago there were only a couple of reported cases.
Pro Comp has received isolated reports over the last year that the installation of 2.0" - 2.75" leveling kits on 2013 and 2014 Ram 1500 4wd pickups will unseat the upper ball joints from the upper arm. In the few reported cases, the ball joints will unseat when the vehicle is removed from the service rack and the suspension is loaded. Since a Chrysler technical bulletin has been released stating that they will not cover their parts under warranty if a leveling kit has been installed, Pro Comp will discontinue use of Level Lift products 61180, 61180K or Pro Runner Struts ZX2014 with the spring seat in the lift height position for the 2013 and 2014 Ram 1500 4wd pickups.
Do not use Level Lift part numbers 61180, 61180K or Pro Runner Struts ZX2014 with the spring seat in the lift height position for the 2013 and 2014 Ram 1500 4wd pickups.
Contact Tech Support for further questions:
Phone: (800) 776-0767
2014 Dodge Ram 4X4 Sport, BakFlip F1 cover, Weathertech DigiFit Liners, BedRug bed mat, PIAA Extreme White Fog Bulbs, ProComp 2.5" / 1.5" Nitro Level Lift, Zone Off Road Upper Control Arms, ProComp 5050 20" -12 offset, MT Deagan 38 35x12.5.20, iron Cross Step Bars, DeeZee Tail Gate Strut
I am the heir to the primo spaghetti sauce fortune!
Last edited by primo spaghetti; 07-15-2014 at 07:57 PM.