Originally Posted by sincebeen
Because the fastest 0-60 is not necessarily the fastest 1/4 Mile.. and you know that....
Do you realize there's more info on a time slip than just a 1/4 mile ET ?
All my recent mods were made to get a better launch, and bring my 60' times down from 2.2's to 1.8's ....not the top end of the track.
Here's a couple recent slips from a few runs on my 305/50R20 Terra Grapplers
My truck runs a 14.5 quarter on my Heavy Ass Grappler's, but still gets a pretty good 2.060 sec 60 foot, and 9.2 sec 8th mile and will still run right around 6 seconds 0-60 on the street.
That's pretty decent for a 5300 pound 4x4 with 90pounds of tire/wheel on each corner.
Its' still the same truck/intake I use to get a high 13 Q/M on DR's.
The filter alone doesn't make or break a track truck or a street truck,
and those that sweat the details are not looking at the bigger picture ...
is only a "supporting mod". and unless you can actually use the extra air, it doesn't really matter. stick with stock
You cant make a heavy 8 second 0-60 truck run 2 or 3 seconds faster with a CAI
You need lower gears and a higher stall torque converter (on top of intake,exhaust,tune)
The cold hard truth (pardon the pun) is a CAI
adds less than 5 HP on a basically stock Ram,
despite what some manufacturers like to claim. Don't let your butt dyno fool you, get a track slip
...even if you just do it for the 60' or 330' or 1/8th mile numbers that are more related to "street" performance.