DODGE RAM FORUM banner

Mother's Clay Bar

2K views 8 replies 5 participants last post by  MeanGirl 
#1 ·
Here is a great product. I have been using this for quite a while. It is really easy to use. All you do is to spray the supplied lubricant onto a panel, rub with the clay bar until the contaminent is removed, knead the clay after each panel, remove with a microfiber towel. After you have clayed the whole car you can wax with the supplied wax or one of your own.

https://store.mothers.com/product_info.php?products_id=26&cPath=5

Here are a couple of things
If you clay you must wax. The clay removes everything down to the clearcoat.
Knead after each panel to get to a clean piece of clay.
Lubricant must be used so no scratches or swirls are introduced.
Glass and wheels can also be clayed with good results.
 
#3 ·
Whew, had me worried there for a minute. I thought you were going to talk about the family here. Man, what a relief!!

On a more serious note, I haven't tried it but I'm thinking of using Meguire's version of the clay bar, here shortly. I'm kinda partial to Meguire's!!
 
#5 ·
i've use both mother's/meguiar's clay great products. pickup the ice clay......wash with dawn.....did the ice clay.... then the ice wax......got me sold.......:smileup:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top