Originally Posted by Actionjackson
How did you paint the ram on the tailgate and what did it involve.
Well i used a product call plasti dip and i have done my front emblem, rear, inside dash, tail pipes, stock rims.
For the back I just used some warm soap and water to prep and once dry I used painter tape and taped off about a good 2 feet of the tail gate to where I was spraying. I did about a good 10 coats on it so it would stay and hold up. When painting leave about a half inch from your emblem to your tape so when u peel off the plastic dip, it comes right off and leaves a super clean edge around the emblem.
For the front emblem it pops right off there are 4 clips holding it in to the grill