Thanks for the warm welcome!
I just set up my account, and added a photo of my RAM 2500 to my avatar but I don't see it now... ?
So far, I've replaced the dashboard due to mfr using inferior plastic. I also had the notorious "death wobble" which was due to bad tie rods.
It made for an exciting ride! lol!
My current major issue now is another common problem with the airflow vents.
I am having airflow issues with the cabin vents. I've posted up the issue on a couple of threads here hoping someone may be familiar with the problem, and hopefully a solution
Here's what I posted:
"When I drive locally, the air conditioning starts out blowing great, but after a while the air flow stops.
You can still hear the blower and if you put your hand close to the vent you can still feel the cold air, but none comes out of the vent. The fan speeds on the blower seem to work, although no moving air is coming out of the vents.
This usually happens more often when driving on the highway at higher speeds. I replaced the blend door actuator located up underneath the blower motor on the passenger side underneath the glove box, and the blend door there appears to be working just fine.
Does anyone have any ideas of what else it could be?
Any advice or insight would be much appreciated."
So, where did you end up moving to from Melbourne?
I've been down in Vero for about three years, and I love it!