DODGE RAM FORUM banner

3500

  1. Grinding Noise front end 2014 Ram 3500 4x4

    4TH Generation Dodge Ram – 2009 to 2018
    My truck has a loud, horrible grinding noise coming from the front end. Sounds like the tab dragging when the brakes are bad, but the brakes are good. It came on all at once and doesn't quit. I had been pulling an empty horse trailer about 100 miles, and this started when I pulled down our...
  2. Will the 5th gen HD's get an 8 speed?

    Automotive Industry News and Dodge Press Releases
    I've said before that if they can build one to live behind the Hellcat and Demon they can build an 8 speed that will hold up to HD truck use-at least behind a Hemi but I think behind a Cummins too. Well, it looks like ZF is getting ready to release their "Powerline" (aka 8AP) transmissions...
  3. 2500 vs 3500 LARAMIE CREW CAB DIESEL

    HD RAM - GENERAL DISCUSSION
    Hey guys, New here and wanted to get your input. I have been looking at the Diesel Laramie HDs and was mostly looking at 2500 until I saw someone mention on a news article comment section to get a 3500 due to the AISIN transmission. When I build both there is currently about a $1K price...
  4. 2016 3500 Longhorn

    2016 3500 Longhorn

    Ram 3500, 4x4, Cummins/AISIN, short bed, SRW
  5. Need to find bcm

    Electrical
    Hey eveybody my 02 dodge 3500 was having issues with the factory alarm system not disengauging so we had it towed to the dealer were they told use the BCM was bad and dodge no longer makes the BCM for that truck i really need to find an aftermarket site that i can get one because this is what we...
  6. Would like to upgrade the 3500 rear leaf suspension...

    HD RAM - GENERAL DISCUSSION
    Hello all, I haul cars with my 3500 6.7 S/T CC w/8-foot box 5th wheel; registered for 38,000#. I regularly exceed 13,000# on my drive axle and would like to upgrade my factory rear leaf springs to ones out of a 5500. I have measured the ones on a colleague's 5500 and determined that the...
  7. Incentive sheets, best time to buy?

    2016 Dodge Ram Forum
    Hello! I'm looking to purchase a 2016 RAM 3500 Laramie this week or if I have to wait get a few extra thousand off MSRP I will. My question is what time of the year here forward can I expect the most savings. My dealer is giving me the current $2500 rebate plus an Additional $6705 off MSRP. In...
  8. 2016 Ram C&C Delivery - right rear

    2016 Ram C&C Delivery - right rear

    Dealership picture just before leaving for home.
  9. 3500 bumper on a 1500?

    Body & Interior
    I need to replace the front bumper on my '06 and can only find used factory bumpers from 2500/3500 trucks. My mounts are fine. (The bumper is an after-market replacement that's rusting, so I want a quality OEM to replace it with and don't want to pay big $. I can get an 08 3500 bumper for...
  10. 2500 or 3500 Laramie bumper on 1500 - 3rd Gen

    Custom Modifications- Interior & Exterior Body
    I was wondering if anyone had done a swap, replacing the stock 3G 1500 bumper with one from a 3G 2500 or 3500 Laramie. I really like the chrome insert at the bottom. My stock bumper on my TRX4 has a black plastic step pad and upper bumper, and a whole chrome lower bumper. At the very least, I...
  11. Tuftruck ttc-1615

    Product Reviews
    I bought these coil springs a few years ago and I have been realizing lately how they have been incredibly good to me. They work great if you need extra support to carry heavy loads or if you are looking to attach a plow on the front of your truck (like I did). I hear they are also great to use...
  12. Does TPMS warning light work with DRW

    2014 Dodge Ram Forum
    I had an unfortunate day the other day, I was toggling thru my EVIC and saw that my inside passenger side tire had zero psi. After physically checking it sure enough it was flat and had a drywall screw embedded in it.The odd and disturbing thing is I never got a warning light? The tire had not...
  13. Trucksie

    Trucksie

    Custom hitch bike rack and Diamondback tonneau. Toy carrier deluxe.
  14. brandonjansen - 2012 Ram 3500 Laramie Limited Cummins Build Thread

    Custom Dodge Ram - Complete Builds
    Well the day finally came where I got my Cummins :SHOCKED: A bit of my story: I've wanted a Cummins ever since I was 14 or 15 years old... they were always just so cool and I got the bug that I needed to build one. So it essentially became my dream to do that one day. Obviously it's not...
  15. Hammerhead Armor

    Hammerhead Armor – Dodge Ram Aftermarket Bumpers
    Want a bumper that protects your truck without killing its style? Hammerhead Armor has the bumper for you. We have the Dodge from 1994 thru current. Check out our bumpers below and the rest of our bumpers at our website at www.hammerheadarmor.com and let us know what you guys think. Your opinion...
  16. Update: Edge Juice with Attitude now works for 2012 Dodge Rams, 6.7L Cummins

    Performance Mods - Engine - Dodge Cummins Diesel
    Ram diesel owners, unleash your 2012 beast!!! Edge just updated their Juice with Attitude programmer to work with the 2012 6.7L Cummins Diesel. With gains up to 100 HP and 250 ft/lbs of torque and 6 different tunes to maximize your needs, this Edge tuner is just what you need! The beautiful...
  17. Won't Start

    Cummins Diesel Specific Topics
    Hi guys, :att: I have a 96 Ram 3500, 12v 2nd Gen 5.9L Turbo Cummins. Plugged in last night went well below 0C... close to -20C, fired it up this morning no problem... ran for about 15 minutes then quit before it was warmed up. I tried to start it again, it seems to start but quits within 1...
  18. getting 3500 rear brake drum off borderline impossible

    Brakes
    I am tryting to check/change my rear brake drums on my B3500 van and it appears I need to take my axle shaft out once I get the tires off. After I take the axle rods out there is a HUGE nut that I cannot get off or find a socket big enough to turn it. Is there a trick to this that I am...
  19. 3500 Right Front Bearing Issue?

    Cummins Diesel Specific Topics
    Hey all, have a possible bearing issue and wanted to run a few thoughts past you all. The "rattling can of paint" sound I get out of the right-front, I had originally thought was a small rock inside my center cap. Paying closer attention revealed that it only makes this sound going forward or...
Top