4.7l engine

Alright so i got a 2004 dodge ram 1500 4.7l magnum its a 2wd truck and ive been having multiple problems with this truck i just now got done taking off the intake manifold twice and i replaced the gaskets and torqued them too 9 ft pounds i put everything back together and now the truck is...

Question, I have read a couple forums about " knocking" or Piston noise. I have a 2013 Dodge Ram 1500, 4x4 4.7L with 5k on it. I have been having the same noise on my truck and no sure what to do about it. I have taken it to the dealer and they inspected it for engine noise when cold, Noise...

I have a 4.7L v8 2002 with a 4 speed transmission, and I'm looking at replacing the engine soon due to it having more than 200,000 miles and it just doesn't run as good as it used to.(it still can get up and go, but after racing my friends 05 with the hemi, I realized how much of a difference...

I drove in to work at 6 a.m this morning and the truck ran fine was a normal morning, when i got off work i started the truck up and let it warm up since its 23 degrees outside and figured the slight white exhaust was just because it was cold, I started on my way home got maybe 20-50 feet from...

Just about two weeks ago, i got new rims put on my truck and the guys at Tire Barn told me that they would level my truck out too when they aligned it. So they did, using my torsion bars, but i don't know if its because my truck isn't a heavy duty or what but the farthest they could crank it up...

so my baby is an 03 1500 4.7l v8 NOT A HEMI and for some reason no one has any love for these in the aftermarket community for some reason. idk why but it really sucks cause i cant get any much needed horsepower to my engine. i mean my buddy's 98 altima is keeping up with me and then kicking my...

i blew my motor up so i got a new motor... the new motor is in and the motor and tranny lined up nicely and the torque converter is in correctly the truck starts and now i have several problems none of which i had with the old motor.......///the first problem is i have a pulsation when i get...

Hi all, I'm new to the group. Problem: have an with a 4.7 and the passenger side fuel injectors are not working. Engine runs, drives, etc but very rough. Had my mech look and he looked and tested - no codes or dash lights. He thinks it is the ECM. I purchased a re-man unit from Cardone, had it...

Anybody that is wondering if Dynomax 39480 will work on 4th Gen 4.7L with dual cutout bumpers. It does all you need is to get a 1 exhaust insulator(oem will be best) and it's easier to install with spare tire off. And it sounds moderate

I have a 2005 Dodge Ram 1500 with the 4.7L engine. I just put in a new K&N air intake on it two days ago, and it seems to be idleing low and has died 3 or 4 times when i was stopped or had it in park. Today is the first day I have driven it a considerable amount since putting on the air intake...

I bought a used Dodge Ram in July with 46,000 miles on it. Dealer said that the previous owner used it to tow and that he needed something bigger to tow bigger loads. Symptoms: -Noticed that truck will periodically hesitate after driving a hour going up to higher speeds usually above 40...

I have a 02 ram 1500 4.7l and want to know if anyone has used AutoMind Programmer by Banks Power and liked it?

Does anyone know if the BBK throttle body thats listed as being for the 1999-2003 4.7L engine will fit on the 4.7L in the 2004 rams? My understanding was that the '02-'07 4.7L engines were all the same, but there was no 4.7L engine in dodges prior to 2002 but somehow BBK advertises the TB for...

Hey guys I have a question.I have a 2002 Ram 1500 with a 4.7l and I was wondering if anyone has done a 4.7 l to a 5.7l hemi engine switch? If so about how much did it cost you for the whole thing I know you will need new wiring kit and motor mounts, and I’m not to what else I will need? I need...

I changed the plugs about 36000 miles without any trouble and now need to change them again at 77000 miles but the 5/8" socket won't fit all the way into the spark plug hole now. Has anyone else experienced this problem and what did you do to fix it?