1. Bilstein 5100's - w/BFG KO2's

    Custom Chassis - Drive Line, Suspension - Leveling
    Here's what I'm thinking: Install front Bilsteins at 2.1 Rear Bilsteins with no spacer BFG KO2's 285/65/20 keeping stock rims Looking for any pros & cons with this set up. Will the tires rub? Do the rear Bilsteins make a noticeable difference?
  2. I need Bilstein 5100 leveling advice

    Hello I recently purchased a 2017 Ram Laramie crew cab. The dealership threw in a set of 275/65r20 BFG k02 tires on the deal. The tires are being put on in a few days. I ordered front and rear 5100s for the truck but after doing research like everyone else I have seen that some people have...
  3. Little help with some bilstein 5100s

    Hey guys. About 2 and a half years ago i put some bilstein 5100s on my truck at the 2.8 inch mark. I have Nitto trail grapplers 295/60r20s on the truck also. I know that messing with the factory angles will cause some trouble down the road and im not trying to start a debate on leveling or...
  4. bilstein 5100 actual height

    Custom Chassis - Drive Line, Suspension - Lifting
    So, I'm going back under my truck to fix my initial mess up with installing my 5100s tomorrow. Now I'm trying to decide if I should go with the 2.1 I initially was going to go with. I'm kind of thinking I might take them up to 2.8. I'm wondering how much height everyone else is actually...
  5. Bilstein 5100 2.1/2.7 and rear spacer

    LD RAM - General Discussion
    Hello, First post here. Recently picked up a 2010 1500 Sport crew cab. Just got my Bilstein 5100s in the mail. Originally was going to go straight to 2.1 and leave the rear. Now I'm thinking about going to 2.7 and doing the TG customs .75 or 1.5 in the rear to get the max lift I can out of...
  6. 6" BDS with Bilstiens on 2010 TRX4

    Custom Chassis - Drive Line, Suspension - Lifting
    I've had the lift for a few months now. It's a 6" BDS with bilstien shocks set to 2.8". I'm running 20x9 SRT replicas on 35x12.5 Nitto Trail Grapplers. Here are quite a few pics. Let me know what you think!
  7. My Truck

    My Truck

    Storm Coming ⚡️ 6" ProComp 2.8 Bilstein 5100 Mickey MTZ 35x12.50 SideBiter II's
  8. Options for leveling plus rear?

    Custom Chassis - Drive Line, Suspension - Leveling
    Hi all, I'd like to level my truck soon. I think I'm pretty set on getting the Bilstein 5100's and putting them to either 2.1" or 2.8". I'd also like to bring up the rear end 1-2" What are my options for bringing up the rear? I've seen some talk about using another set of 5100's to raise the...
  9. Bilstein 5100 Leveling Before and After with pics

    Custom Chassis - Drive Line, Suspension - Lifting
    When making the decision to install Bilstein's 5100 ride height adjustable shocks on my 2010 TRX4, I searched this forum top to bottom looking for a thread that gave a good before and after, but was not able to find one. So I am putting this out there for anyone that is in my situation in the...
  10. Suggestions on New Tires

    Custom Chassis - Drive Line, Suspension - Lifting
    I just installed my Bilstien 5100's on my 06 4x4. Now I'm trying to figure out what size tire I should go with. Was looking at getting a 275/65/20 just to fill the wheel well a little better. Also was looking at a 305/55/20. Not too sure what to go with. If anyone has pics with these tire sizes...
  11. What Leveling Kit - How many Miles - Any problems

    Custom Chassis - Drive Line, Suspension - Lifting
    I am wondering for all of you guys that have a 4x4 and want it to look like a 4x4 so you level it, who has had any suspension problems with their front end after a bunch of miles? I want to know the following. 1. What leveling kit do you have installed? 2. Did you do anything else to your...
  12. 5100

    Custom Chassis - Drive Line, Suspension - Lifting
    I am looking for some Bilstein 5100 shocks to bring the front of my truck up a bit. Its a 2008 and i was wondering if anyone had a part number for the shock they have on a 3rd gen truck. I went to and i found shocks with this number: F4-BE5-E523-H0. I really just want to...