Search Results for ‘5.7’

Im having trouble trying to resolve something. So my truck has had a sound system for like 3 years never had problems but recently it was draining my battery because one of my amplifiers would stay on so I disconnected all the system and went to buy a battery and a alternator from oreliys and...

I have a 2006 Dodge 2500 Hemi that is giving me fits. Its throwing multi cylinder misfire codes, backfiring and bogging at low rpms. Once it gets to about 3000rpm it takes off like someone lit a fire under its ass. Great power, decent fuel mileage (for a hemi). It started out as just a "ever so...

I have a 06 1500 4x4. I bought the fox 2.0 leveling struts and I was just curious what other parts do I need to upgrade to allow for that extra lift? Is it new control arms or track bar or both? I can’t find much info for the 1500, it’s all diesels that have all the parts. If anyone can plz lmk...

Hello I had a question to ask, I have a 2004 Dodge Ram 1500 which has the engine from a 2006 Dodge Ram 1500 5.7 and I keep getting a P0700 code P0113, P0562, P2181 I know the reason for the other 3 codes but no clue as to why I have a P0700 code. The car starts and idles okay but as soon as you...

I have a 2011 ram 1500 Laramie with the 5.7. I have 4 o2 sensor code for heater control circuit failed low. They all came on at once and of course the mil. I am debating on taking it to the dealer cause the fuses for the sensor are internal to the pcm. this has been going on for 3 month now and...

I have an 06' 1500 5.7 and this one has me lost. When driving 55mph (give or take) if I try to kick it down into passing gear the engine just revs up like normal, the truck down shifts, but very little acceleration. At times it feels like the truck has a split second misfire. If I let off the...

Hey all, check engine light came on in my 2012 2500 5.7 2 wheel drive, and truck runs rough until I restart it. Runs fine until I put my foot in it then runs rough again. Took to stealership to have it looked at. After they tried telling me it was spark plugs and something in the fuel system...

(4 wd also) I know there are threads on this and I’ve read them. Just looking for more help. So we’re at about 90k miles. And intermittently noticed truck hard to turn at low speeds. Now consistent overall. The wheel will come back awkwardly and inconsistently through or after turn. Both...

I have a brand new from MMX Holley Sniper EFI sheet metal intake manifold in aluminum finish, it fits 5.7l,6.1l, and 6.4l hemi motors. It comes with all accessories, gaskets fuel rails fuel hose etc. The fuel rails are black with holley sniper efi in white writing on them. It has NOT been used...

What all is required for this swap other than the wiring extension and tuning? I see kits online coming with egr block off plates and such. Also does anyone know of an aftermarket 6.4 air intake tube that would mate up with a 5.7 CAI?

Hello, I’m posting here because I am at a loss. I own a 2013 Ram 1500 with the 5.7. I have P0308 and P1524 showing. The misfire only occurs around 4K RPM, then once it happens it’ll keep up until I restart the truck. Swapped coils, not it, changed the PCV valve, not it. Dealership charged me...

Head lights won’t shut off and Truck won’t restart unless I pump the gas peddle. Upon plugging it in the codes say Engine cooling system fault and on the instrument cluster on the dash says fuel system .. HELP Anyone

I enjoy the TFL Truck guys and the towing comparisons they do. The Ram had a great showing on the Ike, especially compared to the larger GM 6.2 and TT Ford 3.5EB, both backed by 10 speed transmissions. For everyone complaining about fuel mileage with the new Ram, it did pretty well up the Ike...

i have a 2009 1500 laramie 5.7, I have all the common problems, cylinder 2 wiped the lobe. sheared several exhaust manifold bolts. I'm starting my tear down and am looking for advice on the best MDS delete kits with cam, and best headers for the price. any advice is helpful, thank you!

Had an issue with Cylinder #5 misfire. Once looked into found the problem is lifter seized and ground down the cam. Since i already have it opened up i would like to install at least a slight upgrade if i can. I have seen a couple threads on people doing this. Would i be able to use a 6.4 cam...

Greene racing stage 1 HL 210/222 5.7vvt cam Non mds lifters with trays Forged pushrods All parts are off of a 2012 dodge ram rt that I sold and only had 1500 miles on them. Just needs a set of PAC 1219 springs for a complete kit. $800 New Set of beehive springs & New set of forged pushrods...

So, I've got a '14 Ram with the 5.7. Out of the three years I've had her, only two were spent daily driving. 9 months in the middle east let her sit with my wife having to use her as a daily driver for a few months while her car was down, then just weekly start ups and laps around the block or...

Hey y'all how's it goin? For about 6 months I've been considering my different options when it comes to engine swaps for my 98 1500 magnum 5.9 long bed 4x4 and need some opinions/info on what all I'd need to do. I'm considering a swap as I have approximately 215000 Iles on the drive train and...