alignment

I really like our local tire dealers and have been using them for over 50 years. However, we are fortunate to have a three generation family owned alignment shop in our town, I have used them for many years and they, by reputation, are the very best. My experience with them affirms that they...

Hey fellas, I can't figure this one out: The chrome bumper on my 2015 black Laramie seems to be out of wack, look at the first pic: And this second pic is from my friend's 2014 Laramie, just look at the big difference in the lines of the bumpers... How can I adjust it?

Well, you can tell by the way I use my truck I'd kinda like it to stay aligned... But it doesn't. 2015 4wd 1500 with the Mopar lift (Bilsteins at 2.8") I live in the desert and drive dirt roads but I'm not a BAJA RACE DUDE GUY! and don't drive fast enough to drift or catch air.. but this...

Hello all, Anyone know what to do about a cambered-out steering tire and wheel on the right side of the truck? Looking at the suspension system, I do not see the typical upper A arm normally associated with the 1500s. My truck has 47,000 miles on original Nexen 17s and the wear is really bad on...

Hello, I have a 2014 2500 (bought it in Dec. 2014, so just over a year old and under 9400 miles on it). I got it serviced at 7500 miles back in November for its first service and when I got it back, the dealer didn't rotate the tires because their service just includes an oil change, but I could...

I have the bilstein 5100 front adjustable shocks that I am going to have installed tomorrow. I was told that if they were struts I would have to have an alignment done, but since they are shocks it is not necessary. I have also read that after installing the 5100s it is recommended that you get...

Many times is not an alignment problem, but a defective tire Even some brand new tires are factory defective What to do, if the car or truck, is pulling to the right or left side Easy and simple, reverse the front tires and see if it will reverse the problem. (To pull right or left). Once you...

2012 Ram 1500 crew cab sport. Recently installed Bilstein 5100 series height adjustable shocks. When to the second top notch, made the truck perfectly level. Added new tires LT275/65R20. Ever since seems I can't get the wheel alignment correct and there's a shaking in my steering wheel, and...

Stupid question, Im getting my new tires and wheels put on today (pro comp 18x9 7033 wrapped in 295/70/18) and a friend asked if i was getting my truck re-aligned too? I just had a 2.5" hell bent steel leveling installed about 2 months ago and had my truck re-aligned. So after I install...

Alright so I've changed my distributor and I've gotten my fuel sync out of whack and my truck won't fire I couldn't go by the marks that I made when I pulled the old one out cause I replaced it and I can't figure out how to get the thing to line back up even enough to fire to get it anywhere...

I changed out my tires from the P265/70/R16 to the 04 rims tires on the rims are P265/75/R17 and my truck runs fine straight but shakes when changing lanes above the speed of 45MPH. I don't see any rubbing nor hear any rubbing. Anybody know what else could be causing it?

hi i have a 1999 ram 1500 4x4 with 3.5in coil spacers and bolcks for lift and i just replaced the tie rods and tie rod ends with aftermaket. when i put it all back together and counted the threads to align it again the new tie rods had longer threads so the count wasnt worth anything. now the...

I installed a 2.5" HBS leveling kit a few months ago and had an alignment done the following day. But since ive installed the leveling kit the tops of my tires tilt out further than the bottom..(to much positve camber?).. Is this adjustable if i brought it back in?? :4-dontknow: Thanks for any...

Has anyone else had a tire cupping problem with their truck? My tire has a even cupping throughout the tire on the front passenger side tire. I took it in to get an alignment because the tire was cupping and because I had just bought the truck. The alignment place told me that the alignment on...