DODGE RAM FORUM banner

bushings

  1. 2014 Dodge Ram Forum
    So here's my problem. When I go over bumps you can hear a knocking noise. SO I threw the truck up on some stands and started to give things a look. If you cycle the steering by pushing on the driver's side wheel there is no problem. But when you do it from the passenger side you can see the...
  2. Body & Interior
    I need some help. I've owned this truck since I bought it new in 1999! Something this simple should not be this difficult. I'm trying to replace my tailgate hinge bushings on a 1999 Dodge Ram. When I took my tailgate off I only found one rectangle shaped bushing on one of the studs that...
  3. Suspension
    Do I need to lift my truck to lube the grease nipples? I'm a little and skinny person and I can fit under my Longhorn very well. Can I just hard turn my wheels to access most of them?
  4. 2013 Dodge Ram Forum
    I have broken my upper arm and pinion see photo attached. for the 2nd time. I drive in dry creek beds sometimes going over large rocks which is bending the suspension of course. I have been told Rams are not good or meant for this and its why I keep breaking it. What do you suggest? Upgrade to...
  5. Suspension
    I have a wandering and unstable front end. The truck drifts and will not go down the road straight. I am constantly correcting the steering. I checked the steering shaft bushing at the fire wall and it is tight. Track bar and tie rods are mildly loose and worn. The end links are beat. I don't...
  6. Suspension
    so my control arm bushings are torn, doing my ball joints while im there, doing some research i hear that earlier 3rd gen upper bjs arent replacable but you have to replace the whole arm is this true for an 07? you can buy the upper bjs without the arm but just seeing if aneone knows. thanks
Top