DODGE RAM FORUM banner

cam

  1. HPT cam sound

    Performance Mods - Engine - 5.7 Hemi V8
    I love this cam!
  2. Misfire after cam replacement

    2016 Dodge Ram Forum
    So I had the MDS problem with the frozen roller and ruined my cam at 106,000 mi on my 2016 1500. I pulled the motor apart and put non MDS cam and lifters in, got the tuner and removed MDS from the computer, and put it all back together. I didn't pull the oil pump and assumed my timing was...
  3. Installing Cam For first time: Any Advice?

    Performance Mods - Engine - 5.7 Hemi V8
    so over the past 2 months i have been reading everything under the sun about the GEN III 5.7 hemis in order to do a proper cam install. I have bearing pullers, spring compressors, new non MDS lifters, MDS delete plugs, gaskets, seals, on and on and on... The only thing i dont have is the...
  4. For Sale 5.7 hemi stage 1 HL cam used

    Dodge Ram Parts and Accessories for Sale - Trade -
    Greene racing stage 1 HL 210/222 5.7vvt cam Non mds lifters with trays Forged pushrods All parts are off of a 2012 dodge ram rt that I sold and only had 1500 miles on them. Just needs a set of PAC 1219 springs for a complete kit. $800 New Set of beehive springs & New set of forged pushrods...
  5. hours to swap a cam?

    Performance Mods - Engine - 5.7 Hemi V8
    Hello all. How long do you guys think it would take for a guy whose never done it before to cam swap a 05 hemi ram? Im pretty handy and have air tools and all the required parts. Cam is a comp 260 and im doing 6.1 springs, rods, and timing set. heads are staying on. just trying to get a rough...
  6. DIY Hemi valve spring compressor

    Performance Mods - Engine - 5.7 Hemi V8
    Does anybody have one of the low profile HEMI valve spring tools like the crane cam 99476-1 or the SAHVST tool sold by some other places. If so could you send me the measurements of one so i could build one? I dont really want to pay $200 + shipping to canada for one. Thanks guys.
  7. Mds/nonmds cam

    5.7L (345 cu in) HEMI V8 Specific Topics
    Hello, So I am doing the MDS delete on my truck because I have suffered the cam/lifter failure. Is it true that I have to use a non mds cam or can I use the OEM mds cam with non mds lifters and use a tuner to turn off mds on the PCM?
  8. HELP! Problems after engine swap and cam

    Performance Mods - Engine - 5.9 Liter V8
    Ok, here goes.... I have a 2wd 96 extended that started as a 318 with a stick. At 275,000 miles, I got a reman 360 with a mild cam. Got the mopar dual plane intake, k&N cold air kit, and exhaust. However... I have an issue. It vibrates pretty bad. At idle (1000rpm) it shakes the truck a...
  9. 2010 VVT RAM CAM Questions

    Performance Mods - Engine - 5.7 Hemi V8
    I want to cam my 2010 ram. I know there are tons of post on this but there's still not alot of good answers. What cam should I go with should I keep the VVT or should I lock it?. I don't tow I want a badass daily 4 door. I don't want to hear contact inerta or some other shop. I would like...
  10. Crower support

    V10 Specific Topics
    A couple of weeks ago the cam wiped out in my truck. The stupid lifter yoke broke a tab and allowed the lifter turn sideways on the cam. I chose to go with the crower stage 1 cam p/n 35417. It is not listed in their print catalog. You can get the specs online for it. DJ at Crower was a big help...
  11. 206 cam question

    Performance Mods - Engine - 4.7 Liter V8
    I am going to install 206 cams in my truck. My question is should I swap my valve springs as well?
  12. you Cammed Rams

    Performance Mods - Engine - 5.7 Hemi V8
    Hey Mopar heads, just got my truck back together last night: had heads cleaned full valve job, new comp springs and keepers. comp 260 cam, comp push rods. moto blue gen x underdrive pulley. melling oil pump, new timing set, water pump. tuned pcm with diablo 93 tune before first...
  13. Removing heads 03 Hemi

    Performance Mods - Engine - 5.7 Hemi V8
    Silly question.... but I have removed intake manifold, headers, All headbolts, pushrods and rails..... and for some reason my heads don't feel like coming out. they were pulled when we rebuilt the motor about 25k ago. I am needing to pull them to overhaul my valve train this time around. Is...
  14. Picking a Cam

    Performance Mods - Engine - 5.9 Liter V8
    Just thought I'd post while I waited on some help from CompCams.:wavey: Rebuilding 2000 Ram 1500 4x4 motor, Not looking to soup up just looking to build a good long lasting motor. (first timer here) Curious if anyone knows, - ONE - stock lift is .410? well I shouldn't need springs or...
  15. Going Big and Broke

    LD RAM - General Discussion
    well my tranny in my 01 5.9 magnum has decided it doesn't want to go both ways. So in the next week I am going to pick up a used transmission from another ram and tear it apart and overhaul it using viper transmissions. My biggest reason I haven't modified the engine is the weak point being the...
  16. Shorty wires and rear diff gears

    Performance Mods - Engine - 5.7 Hemi V8
    Okay guys I am concerned if there are any side effects to running shorty wires, or even good things. Another thing my truck came with the ol 17s does that mean I have 3:55 gears?i do have the darn open diff. (one wheel wonder) . Regardless I'm wanting better torque and launch so what...
  17. new to this site and have some questions!

    Performance Mods - Engine - 5.9 Liter V8
    hey guys. im new here. decided to pick this forum cause others werent helping me as i was expecting. but my question is prolly something people have asked before. i was considering putting a cam in my 94 ram. its basically stock. wanted some power into it cause of my 35s. i have a dual exhaust...
  18. Need serious help with cam swap

    5.7L V8 Specific Topics
    My 2006 dodge ram truck with a 5.7 hemi is currently in the shop due to head gasket failure. This is a very small shop and definitly no performance shop. They ordered a comp cam 260 cam to replace stock. Comp cam rep told mechanic that he did not need to replace anything else. So he replaced...
  19. Engine mod help!!

    Performance Mods - Engine - 5.7 Hemi V8
    the engine is the challenger and ram are the same a 345ci 5.7l but if i bought cams heads and intake manifold for my 5.7 ram would it be the same even tho its for a challenger
  20. 2010 ram engine mod help!

    2010 Dodge Ram Forum
    the engine is the challenger and ram are the same a 345ci 5.7l but if i bought cams heads and intake manifold for my 5.7 ram would it be the same even tho its for a challenger
Top