DODGE RAM FORUM banner
dodge ram 1500
1-17 of 42 Results
  1. Gen 2 Dodge Ram
    Just did a compression test on my 95 dodge 1500 5.2 one cylinder was low at 115 and another had no compression. This is my first experience with a vehicle that has no compression and I'm not sure what my next step would be.
  2. 2010 Dodge Ram Forum
    Hello amazing members, I have dodge ram2010 1500 HEMI 5.7L , i am trying to separate the block from the tranny housing, i took off all the bolts i was able to detect , however when i use the hoist to take off the block, it is still stuck ,it pulls the tranny with it , i checked online , found...
  3. North East
    I used me emergency brake last week for the first time since owning this 2004 Dodge Ram 1500. I released the brake but the light is still on as well as when I go to turn left or right my truck struggles to make that turn. I feel the emergency brake is still partially in use. Does anybody have...
  4. SUBMIT YOUR QUESTIONS!
    I recently have been issues when I crank my truck up first time of the day. It would make a weird scraping noise then start up at first. After about a week of researching I was thinking the starter so I ordered and replaced it. Now it seems to crank over start for about a second and die. So I...
  5. SUBMIT YOUR QUESTIONS!
    I have a Dodge Ram 2011 4.7L V8 and I installed a new starter with part number 428000-3050. I started the truck and everything ran fine. Later I looked at the old part and noticed it was 428000-3051. So now I’m a bit worried about what the difference is and if I need to take action on taking...
  6. Gen 2 Dodge Ram
    In 1999 my dad bought a brand new Dodge Ram 1500 in Deep Amethyst purple, the first brand new vehicle anyone in my family had ever owned. In 2001 my dad had to sell his dream truck to support is family. I would really love to be able to by the truck back for him but I need helping locating it. I...
  7. Dodge Ram Videos
    Installed a new Carven Exhaust on my truck. What do you think? https://youtu.be/ZLwUmL5SB9Q
  8. 5.2L V8 Specific Topics
    :wavey: Hey all, just picked myself up a 1998 Ram 1500 and it came with 285/75/16's on it. As I was driving it home I noticed the Speedo and GPS were 6mph off, as in the truck was showing 6mph slower than reality. From my research, 1998 is a tough year because late models needed them to be...
  9. 2010 Dodge Ram Forum
    Hello, I recently purchased a 2010 dodge ram 1500 regular cab with the factory NAV deck. I am wondering if there is a way to install a (tailgate camera) backup cam that would work through the factory deck? I've searched the web but I can't seem to find anything that answers my question. Do any...
  10. 4.7L (287 cu in) PowerTech V8 Specific Topics
    I'm looking at a 2009 dodge ram 1500 4.7 v8 quad cam 4x4. Has 62,000 miles I was wondering what you guys think of your rams I want to know everything
  11. Dodge Ram Parts and Accessories for Sale - Trade -
    I'm selling my superchip cortex tuner. I'm asking $325 for it. Buyer pays shipping costs as well. I can be reached at 765-969-1968
  12. 1

    2011 dodge ram custom
  13. Custom Chassis - Drive Line, Suspension - Lifting
    Hey was up guys, I have a 99 Dodge Ram 1500 and I'm in the process of trying to figure out what looks good for my truck. I want a 3inch body lift and 35's but I have nooooo idea what that looks like? And if I will have any rubbing issues. Any one have any pics or ideas what might look good...
  14. Electrical
    I recently bought an '88 150 with a 318. The truck in very rough shape, but runs great. However it takes an age for the high idle to calm down. After digging around I found that the wiring for my choke heater isn't attached to anything. I jumped it to the battery to see if it works and it warmed...
  15. 2013 Dodge Ram Forum
    Question, I have read a couple forums about " knocking" or Piston noise. I have a 2013 Dodge Ram 1500, 4x4 4.7L with 5k on it. I have been having the same noise on my truck and no sure what to do about it. I have taken it to the dealer and they inspected it for engine noise when cold, Noise...
  16. 4th Gen UConnect
    Hi guys just posting this here if any of you guys already try this please let me know i want to get it. https://www.youtube.com/watch?v=a-JR_Lk5A0U
  17. Custom Chassis - Drive Line, Suspension - Lowering
    My 2010 r/t was getting a little tired looking ..So this week i decided to Lower it 2"4" Say good by to my SRT 10 wheels left over from my 3rd gen and install 2013 R/T wheels with some new Good years de badge it install 2013 headlights katzin leather seats carbon fiber dash Check out the photos
1-17 of 42 Results
Top