instrument cluster

as you can see my fuel gauge and temp gauge aren't lighting up. it's a 2012 ram 1500 st model. it was working the other day but now doesn't work at all. was wondering if there is a fuse? if there's a bulb that i can pull out of the cluster and replace? or if it's a circuit board that's gone on...

Okay, so I bought this 2010 ram 1500 4.7l 4x4 truck with 155k miles on it. The only issue I've found with it has been the gas cap being faulty and I'm about to replace it come tomorrow. So here is my issue: I was driving yesterday and suddenly the chimer goes off and I look at my instrument...

I disconnected my battery to make the final connection to the battery power at the back of my truck. I have the upfitters package installed. So I have ingition and battery power behind the rear bumper. After hooking up the battery power to my canopy lights, I reconnected the battery. Everything...

got a 2004.5 3500 cummins 6spd man. driving down the road, chime goes off. after 2-3 time of that the cluster resets and the engine stalls. no buss on rare occasions had head lights turn on by them selves on rare occasions had wipers turn on on rare occasions I installed an external voltage...

Hi all, I bought my Dodge last fall, and it's the first Dodge I've ever owned, so I'm really new. The issue I'm having is that when accelerating slowly, or at low speeds, the truck feels and sounds like it's bogging down. Turning left at low speeds also seems to set it off. At cruising speeds of...

Ok, so I posted a thread a couple days ago about some issues I am having with my '02 Ram 1500! I think I may have I have boiled down to the instrument cluster. After another evening of researching it, I know that when I purchase my cluster I need to take to dealer to program correct mileage to...

I have a 2005 Ram 1500 SLT 2WD. When my ignition is in the "OFF" position, the only thing that I have found to work is the third brake light on the back of the cab. Everthing else that should be working with the key off (the keyless entry, interior lights, headlights, horn, emergency flashers...

It's a 2010 1500. The instrument cluster died for no apparent reason. Nothing works, no tach, no speed, no gas, no lights (indicator or back lights) and no information display. There are two lights on the dash, the seat belt light will come on, although dimmer than normal and when you first...

Hello all, I am a new RAM owner and new to to forum. It looks like a TON of valuable information and knowledgeable folks on here from what I have seen browsing through the various pages. So I picked up my 2014 Ram Express on Saturday 6/28/2014 and it has been in the shop for almost more time...

I need to replace the Instrument Cluster in my Truck. '99 1500 4x4 SLT Laramie It looks like I can get one off ebay for ~$80. Do I need to do anything other than swap the units? I know that the mileage is stored in the cluster and that my mileage will read wrong unless I pay the dealer to...

My truck recently blew a head gasket. I pulled the heads and took them to a machine shop and had them rebuilt. During the re-install I Upgraded to a Hughes FI intake. More details can be found here: http://www.ramforumz.com/showthread.php?t=139708 Unfortunately, now I am getting a "No BuS"...

Another bug in my '03 project (got it at gov auction with 18K miles and a lot of dings and underside surface corrosion - mainly iron parts). '03 / 2500 / 5.7 / auto / 4x4 / reg cab / st. Any suggestions / help is much appreciated. My airbag light faintly lights up when the door is opened (no...

i am building a 2012 ram r/t in a four door since dodge dont offer one, ive installed the hood torque converter leather seats all the trim on the inside i got blk 24 inch rims and it came with the 3.92 lsd rear end, iam now trying to install the evic cluster and ive done so but the buttons on...

Ok, so I've altered this thread after I found some things out. My question now is, if I change my non-tacho oem cluster for a oem cluster with a tacho....is it plug and play? Can I just connect the tacho up? Are the wiring and requisite sensors already there or will it be a case of complicated...