DODGE RAM FORUM banner

leveling kit problem

  1. Leveling Kit Help

    2016 Dodge Ram Forum
    Hello all, Just upgraded my truck from a 2014 1500 Express Quad Cab to a 2016 1500 Crew Cab SLT Lonestar, both 2 wheel drive. Downgraded the engine, thought - went from 5.7 HEMI to 3.6 Pentastar. Don't do much offroading except for at our Ranch in the Texas Hill Country. To level out my truck...
  2. 3.5 inch leveling issues

    2012 Dodge Ram Forum
    All, yesterday i tried to put a 3.5 inch leveling block in the front of my 2012 dodge 1500 quad cab. (I was going to put a 2 inch in the rear after.) We got it all installed but before we took the vehicle off of the jack stands i tried to spin the wheels with my hands and noticed that they would...
  3. Clunk/Rattle after Bilstein Install

    Custom Chassis - Drive Line, Suspension - Lifting
    Had Bilstein 5100's installed at the 2.8 setting in the front of my 2013 1500 Sport. I also installed 1" coil spacers in the rear. I drove home from the shop after the install and returned the next day for the alignment. It drives well and I'm happy, with ONE exception: I now have a...
  4. Front end issues after leveling kit

    Suspension
    Ok so this is going to be a pretty long post so bear with me please; A while back I had a ProComp 2" leveling kit (coil spacers) installed by a "friend" who turned out to be a very shadetree type guy. Well he told me he had a lot of issues getting the camber bolts out as well as the lower strut...
  5. 2014 1500 Leveling Kit- HELP!

    Dodge Ram 4x4 - Offroad Discussion
    I just received my Pro Comp level/lift kit, Part# 61180K, I ordered online from 4 Wheel Parts. I called the local store to setup an install and they are telling me that there is no "leveling" kit that will work on a 13-14 1500. Apparently, Pro Comp has released a tech bulletin stating that...
  6. Pro Comp 2" Leveling Kit

    Suspension
    I recently started the install of a ProComp 2" Leveling Kit. Honestly it hasn't been bad with some patience, pb spray, and a some muscle to knock the rust off. However, I destroyed my upper ball joint with a pickle fork trying to separate the knuckle. Since i had to replace it i decided to go...
Top