DODGE RAM FORUM banner

lifters

  1. 5.7L (345 cu in) HEMI V8 Specific Topics
    Just bought a 2012 5.7 hemi with bad lifters/cam replaced lifters, cam, pushrods, etc. got it all back together and it turns over good and almost starts, but won’t start. Thoughts on where I could have gone wrong? Scanner found issues with o2 sensor, catalyst monitor, O2 sensor heater monitor...
  2. 5.7L (345 cu in) HEMI V8 Specific Topics
    Hello all, Hoping someone can help diagnose a 5.7 Hemi issue. I have a 2015 Ram with 5.7 Hemi with 138k miles. It had the Hemi Tick for a while. I was driving last week and the tick got really loud, started missing a little and had slight loss of power. I had to limp along for about 10 miles...
  3. 5.7L V8 Specific Topics
    Hello there this is my 1st post on this forum excited to get some answers or suggestions. My cylinder 4 intake lifter failed but it didn’t ruin the camshaft bc the Pushrod fell out of rocker So I replaced all 8 lifters on passenger side. So I repaired and reassembled it, and when I crank the...
  4. 2015 Dodge Ram Forum
    So my truck has been at the dealership for 2 1/2 months waiting on OEM lifters but they said there are 11,000 back orders!!!! WTF this should be a recall if that many engines need lifters!! They also had to put a new cam in the engine at only 112k miles so that seems odd too me. My after market...
  5. 5.7L V8 Specific Topics
    not sure if this has been asked. could not find a thread. 2005 RAM 1500 SLT 5.7 HEMI Magnum. experiencing clicking when driving. sounds either from under car or egine, cannot pin point exact location. clicking/ticking occurs: -when pressing on the gas starts around 1000rpm. -sound...
  6. MDS
    Hello! So! To start I have 2009 with hemi . had a Lifter seize and grind down my cam shaft on cylinder 5. So I replaced all lifters and cam shaft with oem parts. I messed up the timing of the cam and crank putting it back together. i put it back together exactly the way it came off. Got...
Top