DODGE RAM FORUM banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 52 Results
  1. 2012 Dodge Ram Forum
    Hello Guys and Gals, Prior to my tune up, the check engine light was on a but I just got my spark plugs, coils replaced. Oil changed, plus air filter. Afterwards, the light turned off automatically. However As I drove on to the highway and punched it, the check engine light beeped and started...
  2. 4.7L PowerTech V8 Specific Topics
    Hello, I recently purchased a new-to-me ram 1500 that is giving me some trouble. Truck is a 2008 Ram 1500 SXT 4x4, with the 4.7 Powertech and the Getrag 6 spd manual. Truck just hit 101,000 miles yesterday. I bought this truck in the hopes of having a more reliable vehicle that I wouldn't be...
  3. Gen 3 Dodge Ram
    Hey y’all! New to the community and sadly that’s because of the issues stated in the title. my 1500 4.7 Liter Dodge Ram from 2005 is having a misfire issue. It was minimal and unnoticeable to anyone who hasn’t delt with a misfire before (stupid mini coopers) so naturally I started with coil...
  4. HD RAM - GENERAL DISCUSSION
    I have a 2006 Dodge 2500 Hemi that is giving me fits. Its throwing multi cylinder misfire codes, backfiring and bogging at low rpms. Once it gets to about 3000rpm it takes off like someone lit a fire under its ass. Great power, decent fuel mileage (for a hemi). It started out as just a "ever so...
  5. 2012 Dodge Ram Forum
    Just went from a MDS cam & lifters to a Non MDS kit by texas speed performance and the truck marks a cylinder 2 misfire and idles pretty rough, also wants to shut off only low rpms. Also seems like one of the lifters is noisy and maybe didnt charge but they were new. If im correct, i need to...
  6. Gen 4 Dodge Ram
    Got a 2014 1500 hemi that the dealer said has a misfire on the 8th cylinder. Replaced the spark plugs, still misfire. Believe the lifter is bad, so going to replace lifters and cam at a independent shop. I have no clue about the aftermarket options and the benefits of different stages, etc. also...
  7. Gen 4 Dodge Ram
    So here's the deal. 2014 Ram 1500 5.7 Hemi w/ 8-speed. I had a seized lifter roller and it wiped out my cam shaft. I tore it down, replaced my old cam and lifters with a non-mds cam and non-mds lifters. Also pulled out mds solenoids, plugged them, and turned off the mds using a Diablo tune...
  8. Maintenance & Repair Archive
    My 15 v6 RAM 1500 has 120k miles on it. Recently I started observing a shake/gitter coming from the engine every other cold start. Now, the shake happens on every cold start and has thrown P0300 code (multiple cylinders misfiring). If this was isolated to a cylinder the code would specify a...
  9. Gen 3 Dodge Ram
    Picked up a ram 1500 5.7 HEMI. I’ve been all through this truck and no idea what’s wrong. Changed alternator. Naught new battery. I’ve done plugs. Tested coils all good. Tested injectors all good. Valves are good. Havnt done a compression test. The idle on cold start is about 1500. And it’s...
  10. Maintenance & Repair Archive
    Hey guys. I’ve looked all around and can’t seem to find an issue quite like mine. Went outside Saturday morning to warm the truck up, started just fine and long enough to get warm. Came outside to leave and the truck was shut off. Hard to start without giving fuel. If it starts it shakes and...
  11. 5.9L V8 Specific Topics
    Hello everyone, I'm dropping this post here because I need some guidance, and assistance with a random, and traveling misfire, hard starts. P0300 My truck is a 5.9L Gasoline Currently my truck suffers a random misfire, a large amount of power loss, heavy shuddering at 1500-1600 RPMS under...
  12. HD RAM - GENERAL DISCUSSION
    Hello everyone. I'm wondering if anyone has some ideas on a issue I'm having with my van. If the van sits for a day or two it will idle rough for a short time then it will clear up and run perfectly. If the van sits for over a week, it will run rough long enough to set an error of cylinder...
  13. 2016 Dodge Ram Forum
    So I had the MDS problem with the frozen roller and ruined my cam at 106,000 mi on my 2016 1500. I pulled the motor apart and put non MDS cam and lifters in, got the tuner and removed MDS from the computer, and put it all back together. I didn't pull the oil pump and assumed my timing was...
  14. LD RAM - General Discussion
    I need help please. I have a 05 1500 with the 5.7 engin. Recently it started giving me trouble. Just after start up while driving you will loose power and the rpms jumps up and down and idle really rough. It spits and shakes. And it takes forever to speed up.After about a minute of doing that...
  15. 5.9L V8 Specific Topics
    About a week ago I started my truck up and it started misfiring; previous day ran fine. Codes P0300, P0306, and P0308. Changed the cap, rotor, plugs, wires, and coil. There are no vacuum leaks and the plenum is sealed with no oil in the intake. The misfire is most apparent at 40-55 MPH when it...
  16. Maintenance & Repair Archive
    2003 dodge ram 1500 5.9l v8 (190k miles) So changed spark plugs, thermostat, temp sensor, wires. The truck overheated this past summer and we changed all of the above within the summer. This fall we started having a misfire which has gotten progressively worse. Cleaned everything with seafoam...
  17. 2011 Dodge Ram Forum
    Hoping someone could give me an idea of what is wrong with my truck. 2011 Ram 1500, 67000 miles, have a cylinder 4 misfire. A little backstory, noticed the idle was rough for a day or so and then the CEL came on. Read the code and cylinder #4 misfire. Only notice the misfire at idle, higher...
  18. 5.7L (345 cu in) HEMI V8 Specific Topics
    I have a 2010 Ram 1500 5.7L that owes me nothing.. 271,000 miles. It recently developed a misfire on cylinder 5, so I decided to replace the plugs. While replacing the plugs, I noticed that the boots on the ignition coils were deteriorating (on cylinder 5 - voila!) so I decided to replace...
  19. 3.7L PowerTech V6 Specific Topics
    So I have a 2008 dodge Dakota with the 3.7. its throwing the p302 code for cylinder 2.maybe 1,000 miles ago it was throwing a random misfire code so i did plugs and coil packs and it fixed the problem but now throwing misfire for #2. i moved the coil around and the problem stayed at #2. i...
1-19 of 52 Results
Top