DODGE RAM FORUM banner

offset

  1. HD RAM - WHEELS & TIRES
    Hey all, So I knew my 2010 1500 inside and out when it came to fitting wheels and tires but I find a lot of conflicting opinions when it comes to fitting 35's on a stock height 3rd gen 2500. My reading has brought me to this point where I'm looking for confirmation from those who have done it...
  2. LD RAM - General Discussion
    Recently I've been in the process of lifting my 08 Ram 1500. I'm set on a 6" Rough Country suspension lift, with 35" Toyo Open Country R/T tires. My issues is that I have my heart set on the Fuel Lethal Chrome wheels. I love them. I'm going for 20x10, but the only offset I'm seeing available for...
  3. Dodge Ram Wheels And Tires
    Hi I am a new owner of 15 ram sport. And I want get new wheels and tires without any suspension modifications. Does anyone know or have a setup of 22x12 -44 offset wheels with 305/45 tires. thanks
  4. Custom Chassis - Drive Line, Suspension - Lifting
    2012 bighorn 4x4. I just put a 2.5 inch leveling kit on it and am now looking at rims and tires. I'm wanting to run 33x12.50x17 and would like them to stick out enough to be even with fender flares. I'm totally clueless and confused by the to offset. Any help would be appreciated.
  5. Custom Modifications- Interior & Exterior Body
    I have a 05 ram 1500 and have come into posession of 2" 5x5.5 spacers (technically adapters i guess)... But they have a smaller lug width than the ones on my truck. I think they are a 1/2" and the truck is a 9/16? Anyway im wondering if its safe to use them. They bolt on its just im sketched...
  6. Dodge Ram Wheels And Tires
    Hey guys, Im sure there is a post within a post of a thread somewhere with the answer im looking for but no such luck on finding, so here it is! I have a 2013 RAM 1500 QC 2wd with a 4" CST spindle front and icon 1.5" coils rear. I had a 2.5 level when i got my current wheels and tires setup...
  7. Dodge Ram Wheels And Tires
    Hi all, I'm in need of your knowledge. I'm buying new wheels for my 14 1500 and need wheel size advice. I'm looking to get the Fuel Trophy wheels but am not sure of the offset/back spacing. I am getting 285/75/18s for the tires and read - 12 offset for the wheels. I don't want them sticking out...
  8. Custom Chassis - Drive Line, Suspension - Leveling
    Hi I'm looking for some info on wheel offset and backspacing. I have a 2014 ram 1500 single cab short box 4x4, I want to put the Bilstein 5100 struts at the 2.1" and I would like to run 295/75R17 tires. (or bigger if I can fit them), I would like to have 17x9 rims but I'm unsure about the...
  9. Dodge Ram Wheels And Tires
    I am looking at ordering at set of Fuel 20x10 -44 deep lip Octane's. i have a 4" lift and Bilsteins set to .7 with 35" Nitto Trail Grapplers on stock 20" sport rims now. I dont plan on running fender flares. what is everyones thoughts or suggestions on -44 offset? too much? too hard on...
  10. Dodge Ram Wheels And Tires
    Hey , I have a 2013 Ram 1500 Sport HEMI Stock Rim: 20X9 Backspacing : 5.24 Offset : +19 I am Looking to upgrade rims however we all know in order to get a good aggressive look there needs to be depth in the rim . Tires I would want to keep the same : 275 60/20 But at this time I am not...
  11. Custom Chassis - Drive Line, Suspension - Lifting
    Hi everybody this is my first post here so go easy on me. I have a 2013 ram crew cab, i have a handful of things I'm going to be putting on and that includes a level and Bushwacker Pocket style flares. I want to run 20" rims (probably black fuel Hostages) on 35" trail grapplers. This leads to my...
  12. Custom Chassis - Drive Line, Suspension - Lifting
    Anyone know how to obtain the "wide stance"? Right now my tires come just past my fender wells. Do I just need to get a wider rim? What about offset? I run 275/60/20 Cooper Zeons on stock rims w/ a 3 in PA body lift. Any help is appreciated!
  13. Suspension
    Hello, I need some advice. I would like to run 38x15.50x20 tires and 20x12 wheels on an 05 1500 QC 4x4... My initial plan was a full 6" suspension lift + 3" body but I know just how wide those tires are and I would need to do some trimming right? How could I avoid all the trimming? I also...
  14. Dodge Ram R/T
    I just got my rt and want a 2/4 drop on 24" rims. I just need to know what's the best or recommended offset so they wont rub or stick out to far. I was looking at some rims with an offset of +12 and there 24x10. thanx in advance
  15. Dodge Ram Wheels And Tires
    Hi all I've been trying to find some aftermarket wheels and tires for my 2006 1500 Megacab 2" level installed. I'm looking to get 33x12.50x20 or 35x12.50x20 mud tires and I just can't seem to figure out which wheel offset I'll need to avoid rubbing. Any help and/or photos would be greatly...
  16. Custom Chassis - Drive Line, Suspension - Lifting
    I've got a '13 Ram Sport, and I want to widen its stance. I plan on getting a 2" or 2.5" front leveling kit. I want to use a 20" rim (black), wrapped in the stock street tires, to widen the stance. Looking for a 0mm to -24mm offset on the rim. Personally, I want to create somewhat of a "deep...
  17. Dodge Ram Wheels And Tires
    Hey guys so I have what seems like the biggest decision in the world and can't make up my mind. I know a fair amount about tires but need some help. So I have a '12 QC 4x4 with fender flares and leveling kit, i plan on getting Fuel Hostage 20X9 rims in either +1 or +14mm offset, the problem I...
  18. Dodge Ram Wheels And Tires
    Hey everyone i am planning on getting new wheel and tires in the next couple of months. I want to get mht fuel pumps matte black with 0 offset and was wondering if that would push it out enough to clear the upper control arm to clear 35 12.5r20 nitto trail grapplers? Any pics of the wheels...
  19. Custom Chassis - Drive Line, Suspension - Lifting
    Ok, so I have a 2 week old truck in my garage. I ordered this thing with the idea of lifting it 4" right off the bat. Well, my dealer made me a pretty good offer and so the 4" Mopar/Superlift kit is sitting at the dealer ready to be installed. Also sitting at the dealer are my color matched...
  20. Dodge Ram Wheels And Tires
    looking to add bigger and wider tires on my 1988 w150 the stock wheels are 15x7in and while finding new wheels i need to know what the best way is to measure the bolt pattern and the backspacing and offset so i can find the right size... i don't know what the heck im talking about...
Top