DODGE RAM FORUM banner
pulley
1-8 of 8 Results
  1. Gen 3 Dodge Ram
    Alright yall, need some input. Belts are lasting about 2-3 weeks. Put a new one on Tuesday, already wearing on Wednesday. 2 idlers and tensioner pulley have been replaced. PS pulley reset... belt keeps riding on the front on the crank pulley. What in the world is going on? Anyone else have...
  2. Powertrain
    2001 3.9, 66k original miles. Truck owned by an older gentleman and given to me. Poor maintenance and it sat for approximately 5-6 years. I replaced all fluids,filters, flushed and such. Before there was no knock. Now there is. Don't want to rebuild, is there something anyone can suggest? I'm a...
  3. 5.7L V8 Specific Topics
    Replacing Power Steering pump on 2008 5.7 but cannot find one with pully other than than dealer cost at 1K plus. All others on backorder for rebuild. Son in law dropped old pump and broke pulley. Cannot find a pulley anywhere. Can anyone help? Afraid to by from supplier that barley speaks...
  4. 5.9L V8 Specific Topics
    Okay I get this 96 dodge ram 1500 with 160k for 800$ ya me... What I was told it needed was a radiator thermistat and tinkering. But for 800$ I was expecting more. Put in new radiator thermistat waterpump hoses etc. It was the original waterpump and the fin had broken off. so got her all back...
  5. 5.2L V8 Specific Topics
    So I just installed a new water pump on my 01'. Now I'm having an issue, the belt seems to be making a popping noise coming from the WP pulley to the crank pulley. I've taken the belt off and ran the motor for a few seconds to make certain it was not a more serious issue. Any ideas why this...
  6. 5.2L V8 Specific Topics
    This is my first post so bear with me. I've replaced both the serpentine tensioner and idler pulley, and can't seem to get rid of this belt chirp/squeal. It will chirp at idle when its really cold or if you rev the engine in neutral or park, While driving it normally doesn't squeal until it is...
  7. 5.2L V8 Specific Topics
    Hi Guys - I need to replace a squeaky tensioner pulley... How do I release the tension to loosen the belt and replace the pulley?? My car's tensioner has a notch in it to stick a socket wrench into to release the tension - but I can't figure out how to do this on my truck (1999 5.2 1500...
  8. 3.9L V6 Specifc Topics
    I just replaced the tensioner pulley which fixed the grinding, bad bearing noise. but now the belt has a constant squeal.. any ideas?? I replaced just the pulley, the mount didn't need replaced. After changing it, I drove for a day and then the next morning it started squealing. Is the belt...
1-8 of 8 Results
Top