DODGE RAM FORUM banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 12 Results
  1. Gen 3 Dodge Ram
    Ok so ive replaced about everything except rearend and it wont shift and starts out in drive only. I can down shift to second and get a lil more Acceleration. But most times after startup it like binds up and dies . If i put it in 4wd then second it seems to soemtimes go into quicker bit also i...
  2. ASK A DODGE RAM TECH!
    Months ago I took my truck in because of a grinding sound that I could feel in the pedals and steering, the shop replaced everything on the front end only for the sound to come back the same day I picked it up. After that the shop said my rear diff was shot and I needed a new rear axel assembly...
  3. Gen 3 Dodge Ram
    I have an older Chrysler 9.25 (not the ZF) I really want to make it a selectable locking differential, however there is not one single company that makes a carrier capable with the older Chrysler 9.25, however alot of selectable locking carriers are available for the ZF, I would love to figure...
  4. Custom Chassis - Drive Line, Suspension - Lifting
    Howdy, im 16 and in FFA which means ill need to do a lot of heavy towing but i own a 2005 ram 1500. I was wondering if i could take a rear axle assembly off of a heavier duty truck and put it on mine too increase the towing capacity. if not what else could i do.
  5. 5.7L V8 Specific Topics
    I have an 04 1500 2wd that was missed by recall on the rear end problem these trucks have. what I need to know is what year rear ends will fit this truck Its a SLT 4 door short bed with the 5.7 hemi it has 3.55s in it but I know a 3.92 will work also. Am I limited to only 02 to 04 trucks for a...
  6. Suspension
    Good Morning Everyone, My son has a 2004 Ram 1500 4x4 with the 3.92 ratio. He was driving the truck and didn't realize that it was leaking from the rear seal and in time, heated up the housing and stripped the ring/pinion gear. I replaced the gears and seals, but there was a small amount of...
  7. 5.9L V8 Specific Topics
    I am new on here. Purchased my 2001 2500 SLT 4x4 Extended cab- 8' bed last summer and now finally getting around to fixing it up. First things first, REAR END was howling, now its grinding at certain acceleration and deceleration points. I assume I need to replace the rear end. Also I know that...
  8. 2014 Dodge Ram Forum
    Just curious if anyone has experienced this or know what it may be. I bought my 2014 in May of 2016 and only recently I have noticed a whining from the rear end. It's not the tires or brakes, sounds like gears and most prevalent under 35 mph while I am braking. Sounds independent from the...
  9. Suspension
    Hello all Has anyone upgraded their 3500 rear axle and suspension with that of a 4500 or 5500? I understand I will have issues if I only try to use the leaf springs out of say, a 5500 because the U-bolts are of a different size. I would also upgrade the rear axle because of the loads I haul.
  10. Custom Chassis - Drive Line, Suspension - Lifting
    I recently stripped my spyder gears out in my rearend while doing "tug a truck". I welded the spyder gears together but the welds broke after about a week. So i bought a spool to replace it but i'm having alot of trouble removing the old gears. I removed the bolt that goes into the center pin...
  11. Dodge Ram R/T
    Hey guys, I took my truck in for an oil change today at my local Dodge dealer and they told me that something about the rear axle on my truck had been recalled. Something to do with fuel drainage..that's all I can remember from what they told me. Sorry I can't give y'all more details, but I'm...
1-11 of 12 Results
Top