1. 2019 Dodge Ram DS/Classic
    Anyone know someone who’s making one? I only know of Mopar and Auburn fear making LSDs.
  2. Dodge Ram 4x4 - Offroad Discussion
    I recently purchased a 2012 Ram 1500 Crew Cab shortbed . I got the front professionally lifted, with Bilstien 6112 strut and springs and ICON delta joint UCAs. The shop was all sold out of rear shocks, and I was moving and wanted to at least lift the front and get new tires before I moved, so I...
  3. 2019 Dodge Ram Forum - DT
    First snow/ice storm a few weeks ago my wife got my 19 Ram sideways and hit a curb at around 20 mph. The tire (22 inch rim) snapped off the axle and so far they have had to replace nearly everything on the back end including the axle tube that was bent. After getting a list of everything that...
  4. 2012 Dodge Ram Forum
    Hello, I have 2013 RAM 1500 Laramie Longhorn and I am looking to change my rear shocks. I am currently looking at the following brands, what would you recommend me? KYB SACHS Monroe
  5. 2015 Dodge Ram Forum
    Does anyone know the exact fluid capacity for the rear differential? I've heard everything from 2 - 2.5 quarts. The other day I drained and replaced my fluid and I put ~2.5 quarts in, and that wasn't enough to make any drain out through the fill hole, and I was on level ground when I did this...
  6. LD RAM - General Discussion
    Noticed my front sway bar bushings were starting to creak today when I pulled over an uneven driveway slowly with the blower and radio off so i am going to replace them. I ordered the Moog K7384s for the front-I don't have a caliper but I used my adjustable wrench to determine I have the 36.8mm...
    I am consistently getting a "click click" when moving from a stop. This happens in drive and reverse. It is coming from the rear of the truck. Being that I am new to owning a truck I am not familiar with servicing driveshafts and Ujoints. Perhaps something needs grease? Thanks for any replies!
  8. 5.7L (345 cu in) HEMI V8 Specific Topics
    I actually have two problems and don't know if there related to each other. My first problem that I'm feeling is a shimmy or a shake. I only feel it in the seat/floor/pedals. It's pretty much at all speeds. When I go over a bump it's even worse. I don't know if it's related to the...
  9. Angled Rear View

    Angled Rear View

    Angled view of the rear. This is the Lone Star edition which is rare around my parts.
  10. 2016 Dodge Ram Forum
    I took deliver of my 5500 the very end of last year. I have noticed consistently (as in even after the hour drive home from the dealer) after a long drive on straight roads, a slight shudder from the rear end when turning. At first I attributed it to the Limited slip clutch discs needing to...
  11. Body & Interior
    Hi, Does anybody know for sure whether the rear underfloor storage bins were a standard feature on all the 2012 2500's or an option? I'm in the market for one of these and this is a feature that I would really like to have. The very few I'm finding for sale are all SLTs and pretty far away so...
  12. Custom Chassis - Drive Line, Suspension - Leveling
    Hi all, I'd like to level my truck soon. I think I'm pretty set on getting the Bilstein 5100's and putting them to either 2.1" or 2.8". I'd also like to bring up the rear end 1-2" What are my options for bringing up the rear? I've seen some talk about using another set of 5100's to raise the...
  13. 5.2L V8 Specific Topics
    So, I needed to replace a leaky rear drum break cylinder and have noticed there is excessive play in the hub bearing. I can actually wiggle it up and own and see it move in the bearing. I want to replace the bearings but on the end of the outer hub is a metal plate with a hole in the middle...
  14. Deep Blue Corners

    Deep Blue Corners

  15. 5.9L V8 Specific Topics
    Ok so i need sone help. I have a 2001 ram 1500 that just srarted leaking in the rear. I know i need to replace the pinion seal and get a new crush sleeve. My question is what is the torque value for the crush sleeve and ahould i change the axle seals at the same time. I have changed gears in...
  16. Electrical
    So I have looked all over this site (got a bit impatient so if it has been answered before somewhere else i apologize) I have an 03 ram 1500 regular cab hemi. the previous owner decided to splice in a 4 plug harness and did a horrible job of it. from the start i had problems with the left tail...
  17. 2010 Dodge Ram Forum
    OK, I Bought A 2010 Dodge Ram SLT, I received an incredible Deal on This Truck!! I Really wanted to buy the RAM with the one piece painted front bumper and fog lights (like the one in the picture).. I Currently have the chrome front and rear bumper but I want to convert to the one piece painted...
  18. Custom Chassis - Drive Line, Suspension - Lowering
    Anyone found a cheap place to pickup a rear swaybar for the 1500's I was also wondering if the one off a 2500 or a 3500 would work other than mounting to axle it should bolt in right?