rebuild

Hey guys im rebuilding the rear diff its a 9.25 trac loc with 3.92 gears. she broke a few clutches but the gears are fine. shes living on the bench awaiting parts. doing the bearings and seals because piece of mind. youkon gear clutches and timken bearings. Do you guys like keeping your lash to...

I have a 2005 hemi ram that keeps blowing up transmissions after a year :smiledown:. Truck just has some bolt ons and a reasonable cam. Im rebuilding it for the 3rd time now all with good clutches and parts. I also have a bigger transmission cooler. Im wondering what else i can do to beef it up...

I bought an indy truck in which the motor and trans were pulled and the uy had bought another 360 to go back in it and he had some health stuff come up so I bought it off him. first im not sure if either engine or the trans are any good. im just trying to see where to start??????????? ive never...

So I bought a 2005 Dodge Ram slt with a 4.7 magnum in it then 1 month 1 week after owning it it dropped a valve seat just to test my patience. Now that I have the heads torn off the motor I was looking at airram.com's rebuild kit with Pistons. I was wondering what kind of gains I would get out...

So here's another likely story of my 05 Dodge Ram slt that dropped a valve seat on me only owning the truck for about 2 months. So far I got the heads off and everything else that comes befor that but now I ask what should I do with it? These heads I am at dismay with first of all. I plan on...

Just thought I'd post while I waited on some help from CompCams.:wavey: Rebuilding 2000 Ram 1500 4x4 motor, Not looking to soup up just looking to build a good long lasting motor. (first timer here) Curious if anyone knows, - ONE - stock lift is .410? well I shouldn't need springs or...

Thought I'd drop a thread. I've had 3 different Rams in my life right now sittin on a 2000 5.9 360... Lookin to do my first rebuild on it or possible new motor. If anyone reads this could you help me out on pulling the motor??i have everything disconnected (bolts and all)just need to pull the...

Hey guys, I've been trying to get my engine rebuilt for better performance but the block i have is cracked. All the rest of the parts that im keeping are still good, i just need the block. Its a 5.2 liter out of a 97 Ram. Does anyone have one or know of one that floating around? Trying not to...

Hey guys, I've been trying to get my engine rebuilt for better performance but the block i have is cracked. All the rest of the parts that im keeping are still good, i just need the block. Its a 5.2 liter out of a 97 Ram. Does anyone have one or know of one that floating around? Trying not to...

I recently stripped off the heads on my 5.9 to repair a blown head gasket. I'm trying to decide if I should just go ahead and put new rings in it since I'm most of the way there now anyway. My questions are Has anyone tried to rebuild the lower end w/o removing from the truck? Any sources for...

Hey yall, i am currently a newbie on this site, and would start with that i am wanting to rebuild my 318 5.2l, i want to add more power and throttle response at the same time. any suggestions for good rebuild kits and ways to add power without emptying my pockets would be great!!

Hey fellas, I've got a 1986 D250 that was my grandpa's and has been in the family since it was new. After years of use on the farm and down the road, it leaked from every orifice possible, so we recently rebuilt it. The build went great and with minimal problems until the end; we are having a...

alright guys, so i just bought a donor ram thats in great cond minus ALL the body pieces... but it has a 360 (5.9l) & id like to build it up & stroke it out myself, but i really dont have the time. ive seen places online that u can send em ur engine & theyll stroke it out for you... but im not...

Has anyone rebuilt a 3.7? Can you put 6.0 rods in it without replacing the crank?

Im starting my build. I have a 95 1500 2wd with the 5.9 in it. My old man is the original owner. Some of you may remember it because you gave me some shlack about a thread up about it. it was titled this is what a 260k ram looks like. i meant milage and people assumed $$ when they read it. Well...

Im sure this topic is more worn out than a North Las Vegas hooker but i need help on my rebuild. I have a 1995 Ram auto. It doesnt shift to 4th/OD and the other gears seem to be slipping too. At the moment the truck is in the driveway. I know i need a rebuild, and to stay away from Mopar...

Since I got my truck back, the rear end is whining and I have not pulled the rear cover off for inspection yet but I am going to pull rear end apart and put new seals and bearings for a rebuild! My question is....How do you remove pinion gear?? Im not familiar with the Dodge rear ends verses...

I am probably gonna have to buy a new engine for my 2002 Ram 1500 Quad cab with the 4.7. What would be the best brand to get for reliability and gas mileage and power. I also don't want to change any electronic controls either, so I would need something to fit right in. What do my fellow...

Ok people, given my upcoming 5.9 overhaul, I decided I'd best get some knowledge. I've stripped and rebuilt engines over the years but everyone is different and it's nice to know specifics from experienced people. I found these two books and thought I'd post the links here cause I'm sure others...

Hey guys and Gals I'm new to this Forum and would like to know if any of you have links or directions on how to rebuild an A/C compressor for an '01 Ram 1500. It will not hold coolant for over a summer. I am not afraid to undertake the task and if I [email protected]&#w it up oh well I nee a new one anyway...