Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 15 Results
  1. 2022 Dodge Ram Forum
    Hello. I bought a 2020 ram 1500 bighorn that had a 3.5" ready lift on it with 35" tires from a ram dealer. The ride seriously sucks probably because of the preload spacers. Also getting a lot of squeeking from the front end while turning. Sounds like from either the cv axle or ball joints on the...
  2. Gen 4 Dodge Ram
    Hey folks. I’m looking to do a cam swap on my 2017 Ram 5.7L. Looking for the most HP gains with out losing reliability, understanding that I’ll also be looking at swapping out springs and push rods and possibly lifters to keep said reliability. Any useful suggestions would be greatly appreciated.
  3. Custom Chassis - Drive Line, Suspension - Leveling
    Has anyone used the Bilstein coil springs that raise the rear by 1 inch? If so, are they better or worse than stock springs? Firmer or softer? Any input is appreciated.
  4. Custom Chassis - Drive Line, Suspension - Leveling
    looking for some information on a 2wd leveling kit. I wanted to know what the legitimate difference between the spacers for 4wd and 2wd 1500s are? its very uncommon to find leveling kits for my 1500 and super easy to find the ones for 4wd. are there any major differences (bolt patterns, size...
  5. 2014 Dodge Ram Forum
    My 2014 Ram Express 2 Door has 12,000 miles on it. About a year ago, I developed a squeak in the back left of the truck. It's very loud. I can hear it with the windows closed while going over a speed bump (dealer said they drove it two miles and couldn't hear anything). I wanted to replace the...
  6. Performance Mods - Engine - 4.7 Liter V8
    I am going to install 206 cams in my truck. My question is should I swap my valve springs as well?
  7. Product Reviews
    I bought these coil springs a few years ago and I have been realizing lately how they have been incredibly good to me. They work great if you need extra support to carry heavy loads or if you are looking to attach a plow on the front of your truck (like I did). I hear they are also great to use...
  8. Performance Mods - Engine - 5.7 Hemi V8
    Silly question.... but I have removed intake manifold, headers, All headbolts, pushrods and rails..... and for some reason my heads don't feel like coming out. they were pulled when we rebuilt the motor about 25k ago. I am needing to pull them to overhaul my valve train this time around. Is...
  9. Suspension
    I have a 2003 Ram 1500 Crew Cab SLT 4.7L The rear end is 3.5" higher when measuring on a flat and level surface from the ground to the top middle of the fender. I want the front to be completely level, if not higher than the rear. What size coil spring spacers do I need? Also, how much do 1"...
  10. Custom Chassis - Drive Line, Suspension - Lifting
    Will a 2014 2500 Shocks and Springs bolt into a 2013 1500? I would like the extra ride height and durability of the 2500 suspension, but want to keep the parts OEM. Will this bolt right in??? :thk:
  11. Custom Chassis - Drive Line, Suspension - Lifting
    Hey guys and gals. Haven't been on here in awhile (sorry). Just a little background info, had a new Hemi installed about a year ago, so she's a baby still. Everything else is stock. haha Okay, enough with that. I was thinking about leveling out my truck about 3" or so, but after reading...
  12. Custom Chassis - Drive Line, Suspension - Lowering
    found great replacement springs for these old truks. After a couple trys tho. 330110-500 EIBACH 5"x11" COIL SPRINGS 1 $54.99
  13. Custom Chassis - Drive Line, Suspension - Lifting
    Ok so here is my delema I want to raise my truck at least 4 more inches the problem is someone at some point has already lifted it but I don't know how to figure how much I'm guessing they blocked the leaf springs in the back cuz I can see it and put bigger shocks and springs in the front I know...
  14. Custom Chassis - Drive Line, Suspension - Lowering
    Hello All, I have been contemplating returning my lowered 2WD back to stock. I bought the truck with the lowering kit already on. I would like to know where to find out what kit was put on there to begin with. Are there any markings on the springs itself? Any help would be greatly...
1-14 of 15 Results