Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Suspension
    I replaced all my steering gear except the steering shaft and steering box. I added a anti wobble bracket to capture the steering box at the pittman arm. I replaced the stock coil springs and shocks with Skyjacker parts and Max Power longer stabilizer bar links. Now if I am traveling over 30mph...
  2. 6 inch lifted 1500

    2013 ram 5.7 quad cab 6 inch zone lift,5 in rear ,6 up front with bilsten 5100 set at the second setting. On 20x10 tuff t10 -19 offset, on 37x 12.5 x20 amp terrain gripper
  3. Suspension
    I have very loose steering, after checking my tie rod ends, steering column shaft bearing, and pitman arm, i figured out that the pitman arm was loose. I saw a steering gearbox stabilizer online but I don't know it i need a new box or if the stabilizer will help. Also, would adjusting the box...
  4. Suspension
    I have a 2003 dodge ram 1500 1/2 ton. I just put a new steering gear box in it, which was very hard to find. I want to find an aftermarket stablizer (the bar that hooks to the bottom of it and the frames so it wont move back and fourth and wear out) for it but they only seem to make them for...
  5. 5.9L V8 Specific Topics
    I have a 2000 Dodge Ram with the 5.9L V8 with 4WD. I am in the middle of replacing the steering gear(box) because the seal on the output shaft on the pitman arm failed and started leaking power steering fluid. I ordered a new steering gear from parts train. My problem is this. We compared the...
1-5 of 5 Results