DODGE RAM FORUM banner

valve

  1. No start after lifter replacement. Bent pushrods help!!!!!! 2004 5.7

    5.7L V8 Specific Topics
    Hello there this is my 1st post on this forum excited to get some answers or suggestions. My cylinder 4 intake lifter failed but it didn’t ruin the camshaft bc the Pushrod fell out of rocker So I replaced all 8 lifters on passenger side. So I repaired and reassembled it, and when I crank the...
  2. 206 cam question

    Performance Mods - Engine - 4.7 Liter V8
    I am going to install 206 cams in my truck. My question is should I swap my valve springs as well?
  3. p2v clearance problem

    Performance Mods - Engine - 5.9 Liter V8
    Hi. I have a little problem with my build... I'm checking piston to valve clearance and it doesn't work... I checked with the hydrolic lifter i will be using, and there is no problem, about 0.250 clearance on the intake.... But every body tell me to check this with a solid lifter..... so i make...
  4. 30 psi compression in cyl 8. 2000 ram 5.9

    5.9L V8 Specific Topics
    hey guys, i just got the crappy results from my at home compression test. im getting 150 psi out of every cylinder except for number 8...which read 30 psi. i hear stories of 100 psi and having to to lifters valves or seats ext.... but i feel like with the 30 psi reading im getting, that the...
  5. 02 Dodge Ram. cylinder 7 misfire..Dodge says it's Bad Valve Guides..

    4.7L PowerTech V8 Specific Topics
    I bought my 2002 Dodge Ram 1500 4.7 litter (for better gas rather than hemi 5.9) Quad Cab SLT used with 129,000 miles it ran GREAT! Vroom Vroom ; ) thennnnn Check engine light came on...I changed the Plug & Coil and dodge switched them out and said it wasn't the prob...they told me it wasn't a...
  6. EGR replacement

    5.7L V8 Specific Topics
    I was gonna upload pics of the process, but after I saw how simple it was i didn't think there was any need..I got my new one down at napa for just under $50 with the gaskets included. The EGR on the 5.7 is on the passenger front side of the engine, close to the alternator. First of all...
  7. hole in the valve cover!?!?!

    5.9L V8 Specific Topics
    So I'll start at the beginning. My truck is a 2001 ram 1500 360 4x4 off-road. About a week ago while tinting my windows, I noticed that I had a small oil leak coming from somewhere I could not see from underneath the truck. So I brought the truck home, and parked it until this afternoon. I...
Top