DODGE RAM FORUM banner
1 - 5 of 5 Posts

·
Registered
Joined
·
227 Posts
Discussion Starter · #1 ·
I took my kenwood kvt-516 from my eclipse and wanted to install it in my ram and when i removed the stock radio and looked at the connecter it was different, so I went to ask my local audio store about the correct connecter, he said it requires a $160 electric box, is this right? i just had to splice wires to a connecter to connect to my eclipse, shouldn't it be the same?
 

·
Registered
Joined
·
420 Posts
I have a KVT-514 and in order to install it in my 2008 I needed a converter from PAC audio which was right around $160.
 

·
Registered
Joined
·
611 Posts
You have to use a canbus adapter. C2R-CHY4 is what you need from PAC. Its not $160 though. I bought mine at Sonic Electronics for $80.
 

·
Registered
Joined
·
113 Posts
Just purchased PAC C2R-CHY4 for my truck for $66 brand new on Ebay. On the 3rd. just type it in on Ebay or Amazon you can get it alot cheaper then $160.
 

·
Registered
Joined
·
3,100 Posts
Ive bought two of the PAC harnesses for our trucks for under 70$ shipped through amazon
 
1 - 5 of 5 Posts
Top