[tudsdustin]

i have 2014 ram 1500 express. and installed a pioneer avh x2600bt radio on it and used the metra wiring harness.. the problem is when i put it in reverse camera mode... the screen is flickering...and its not even showing the full screen... i wired the power for the camera straight to the white wire of the reverse bulb and the ground to a known good ground... but yeah any ideas how to fix it? i also atcched a video so you guys can see whats going on
https://www.youtube.com/watch?v=J4ZE-nFhCw8&index=1&list=UUtr4KalZr3prCoYDCigZbfQ

 

[tudsdustin]

hmmm all thise views still no reply lol

 

[rudyyoko]

Double check your ground and wiring, if it works but is flickering, that would be my first guess. Is there an impedance requirement on the length of the wire that runs the video for the camera? Another thing that could be causing problems is there might be some inductance interference from the other wiring. I am not familiar with the wiring or shielding you might be using. Good luck.

 

[john94si]

With the correct metra kit you do NOT hook up any wires to reverse. Just wire it to the harness and it gets the signal from there like OEM.