DODGE RAM FORUM banner
1 - 9 of 9 Posts

·
Vendor
Joined
·
21 Posts
:unsure:
 
  • Like
Reactions: MJS73

·
Registered
Joined
·
6 Posts
Discussion Starter · #6 ·
It is a Laramie so I had to trim the fender flare in the tire well and I put a sheet metal screw to hold the tire well liner a little tighter by the rocker. No rub after I did those things. Bilstein 5100 set at 2.7 35 12.50 R20 Toyo AT3 -19 Offset 20x10 Fuel Wheels
 

·
Registered
Joined
·
95 Posts
It is a Laramie so I had to trim the fender flare in the tire well and I put a sheet metal screw to hold the tire well liner a little tighter by the rocker. No rub after I did those things. Bilstein 5100 set at 2.7 35 12.50 R20 Toyo AT3 -19 Offset 20x10 Fuel Wheels
That's my concern with going aftermarket on the wheels and non-stock on the offset, although yours doesn't seem as involved as others I've read about and seen in person. I got 35x12.5s to fit on my stock rims, but they're tucked in just a little too much for my taste. My older phone skews the images a bit, but this is what I'm talking about:

Automotive parking light Tire Land vehicle Vehicle Wheel
Wheel Tire Land vehicle Car Vehicle
 
1 - 9 of 9 Posts
Top