DODGE RAM FORUM banner

1 - 15 of 15 Posts

·
Registered
Joined
·
236 Posts
Discussion Starter · #1 ·
I just finished installing the Kmc Slide's in 24' with a 285-40-24 Toyo Tire.
These are not the best picture's but after i lower it next week , i will have some very nice wall pics for the forum.



 

·
Registered
Joined
·
80 Posts
Need to go ahead and debadge or smoke the emblems and tail's then it will look real great. looking forward to the lowered pics
 

·
Registered
Joined
·
236 Posts
Discussion Starter · #4 ·
thanks guys , i know that Belltech's stock is in for our trucks and my suspension left already , as soon as i get it and lowered , i will be glad to post images.
 

·
Registered
Joined
·
1,537 Posts
Got em on mine with 305 35's and yes they are bad ass and hard to get!
 

·
Registered
Joined
·
236 Posts
Discussion Starter · #6 ·

·
Registered
Joined
·
1,537 Posts
Yes as KMC does not make many with a dodge bolt pattern then yes they are hard to get. It took me a week to just to find a set of "blanks" ie: not drilled yet. Then roughly another month to have them shipped to KMC to get drilled then back to the wheel shop i found them at to get tires on them and then to get them shipped out to me. I called different wheel and tire shops all over the US and all of them said that they ussually dont make slides drilled for rams so i allways just tell people that mine are custom made hehe!
 

·
Registered
Joined
·
236 Posts
Discussion Starter · #9 ·
Yes as KMC does not make many with a dodge bolt pattern then yes they are hard to get. It took me a week to just to find a set of "blanks" ie: not drilled yet. Then roughly another month to have them shipped to KMC to get drilled then back to the wheel shop i found them at to get tires on them and then to get them shipped out to me. I called different wheel and tire shops all over the US and all of them said that they ussually dont make slides drilled for rams so i allways just tell people that mine are custom made hehe!

Well in 24' the shop i deal with has 3 sets in stock for the Dodge ram. Its good that there blanks and that they can be drilled because they made mine hub centric and the ones that come right from the factory the Center Bore is open really big so that means you have to use hub rings.
 

·
Registered
Joined
·
3,100 Posts
need bigger pics!
 

·
Registered
Joined
·
236 Posts
Discussion Starter · #12 ·
Just got the suspension in today , will be dropping it Tuesday
 

·
Registered
Joined
·
168 Posts
Woooow.. what a guy. I was going with a black and subtle chrome theme with my sport. But now you have me contemplating a murdered out route.
 
1 - 15 of 15 Posts
Top