DODGE RAM FORUM banner

1 - 3 of 3 Posts

·
Registered
Joined
·
390 Posts
Discussion Starter #1
Hi all, I am thinking of upgrading my oem 17's to an 18. I would like suggestions on the wheels and tires. The wheels are an 18x9 with a 0mm offset and the tires are a 285/65-18. My truck has stock suspension, so naturally I am worried about any rubbing. This is why a 0mm offset appealed to me. Is this wheel and tire combination something that would be ok for a stocker?
 

·
Registered
Joined
·
390 Posts
Discussion Starter #3
Yup, that combo should work fine :smileup:

http://www.ramforumz.com/showthread.php?t=55191

Thanks a lot! I was worried about the offset of the wheels I was considering as well, but after doing the math, I don't see an issue. Of course I wanted to ask opinions first. I had a bad experience with a set of wheels from ebay for my old F150 (please excuse that F-word.. :158:) that resulted in a lot of rubbing (from a seller who said, "Oh yeah, I've put tons of 305/55/20's on 2wd's..."). Thanks for the link as well, those are 17's but gives me a good idea on fitment.
 
1 - 3 of 3 Posts
Top