DODGE RAM FORUM banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,151 Posts
The top ring is metal and has to be removed by unscrewing. The antenna housing has flat spots that engage the fender and keep it from spinning. That is unless the assembly is badly rusted together. They sell a socket with prongs on the bottom for removal. You can use pliers of some sort but have to be really careful you do not hit your paint or damage the metal ring.
 
  • Like
Reactions: JTX726

·
Registered
Joined
·
1,151 Posts
Sorry, misunderstood what you were asking. Yes the stud is removable from the thin sleeve it is screwed into. However, the OEM stud does not look like that. There is also a black plastic ring that should be around the sleeve that appears to be missing (actually think it is not supposed to be removable). Looks like your sleeve is torn from excessive force? Judging by the amount of rust and missing part, you may have to replace the antenna mount. Look up 05064394ah to see what it should look like and what you are missing.
 
  • Like
Reactions: JTX726

·
Registered
Joined
·
1,151 Posts
My bad in the beginning. I had not read your post correctly. Yeah, the stud comes out. Have a look on Youtube. Several videos of people changing their Ram antenna. The stud should stay with the antenna so not sure why the Mopar replacement part is showing the stud installed? If you look the part sticking out is knurled and not threaded.

The Rock Auto price looks good. They have a 5% extra off discount code you can use also. Code is in the first post in this thread.


One of many antenna videos:

 
1 - 3 of 3 Posts
Top