DODGE RAM FORUM banner

Baking Headlights Info Needed

8755 Views 13 Replies 7 Participants Last post by  millon9
Hey guys. Just wondering if someone has a step by step for how to bake the headlights and the tear down and re install. Thanks
1 - 1 of 14 Posts
250, 18 minutes, start at the bottom corner, towards the grill. Yank them apart. Remove ALL old glue, it is not reusable on the 06+ headlights. Reseal with butyl rubber.

Tip - put the bezel back in the lens before you attempt to seal. Some put the bezel on the housing then try to smoosh the lens on, that doesn't work well.
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top