DODGE RAM FORUM banner

Bilstein 5100 Adjustment Question

4905 Views 10 Replies 7 Participants Last post by  h2oman
Those of you with the Bilstein 5100's installed on your 4th Gen Rams, I am curious as to how difficult it is to make height adjustments once they are installed. The reason I ask is that I already have a 6" ProComp Lift and want to add these to level out my truck. I have seen conflicting comments as to whether the max setting (2.8") is too much. This is on top of the fact that when compared to other 4th Gen with 6" lift that it seems mine doesn't sit quite as high. I woudl like to be able to install these with max setting and then go from there to get the best setup. The attached picture is how my truck sits now. Thanks.

Attachments

See less See more
1 - 1 of 11 Posts
They will give you up to 2.75 inches of lift in the front. That should take out most of the rake.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top