DODGE RAM FORUM banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Surely I'm not the only one. Remove tailgate , load camper > no camera.
I bought another OEM camera with P68189124AB harness to find I need another cable to make ends meet. I tried a cable from another custom bed install (68253895AA) and it was correct at both ends.

does 68200274AA (10ft) or 68239372AA (30ft) have same plug ends ?

I'd build my own cable if i had schematic / pinouts for camera & tailgate
there's no color continuity from camera to chassis
should simple enough .... +12, -12, sig , guide
cables are expensive and reverse polarity could toast camera.

lastly I'd like to be able to turn camera on any time with add on switch (emulate reverse)
and
turn off guide lines
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top