DODGE RAM FORUM banner
1 - 2 of 2 Posts

· Registered
Joined
·
13,692 Posts
You got it right!

For crew cab:

Driver 802AB (purple tag)
Passenger 801AB (green tag)

Driver spring should have been roughly 1/2 inch longer.

How much drop did you end up with? I cut 1.5 coils on my quad cab (different springs) and only ended up with about 3/4" to 1" of drop... I used RT springs (about same overall length as my stock QC springs) and cut them. If you just swapped to the RT springs you'd probably drop an inch right off the bat.

EDIT: Do you have any pics of your springs?
 

· Registered
Joined
·
13,692 Posts
Looks like you lost about half of the contact area with the spring perch. I'd suggest you look at getting some RT springs, even if you cut them like I did they will give much more contact.

I agree even with less than 1" of drop on mine it made a huge difference.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top