DODGE RAM FORUM banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3,100 Posts
Discussion Starter · #1 ·
Anyone taken their dash out yet? Thinking of some suede ideas to cover the ugly tan dash and need to know how to get the bastard out
 

·
Premium Member
Joined
·
32,794 Posts
I know that i have seen images of the radio removal of a 4th Gen Ram, i believe the images were from a Ram with a Full Floor Console

Another member either has or is about to switch out their EVIC, hopefully they will post pix of the process

this may help you some
http://www.ramforumz.com/showthread.php?t=92140

also check the bottom of that page, there is another 3 posts, 1 is for a 2010, it has schematics
 

·
Registered
Joined
·
10 Posts
its fearly easy to do, i removed by my self the mid console/floor console.
The whole dash, is something different, i think if you really whant to do it good, i think you have an houre 2 to 3 work to disamble. And if i am wright there are 2 bolts in the firewall.
 

·
Registered
Joined
·
132 Posts
im interested in removing my dash too i just installed a alpine INA-W900bt headunit and was putting the screws on the dash and one rolled down and fell in the vent, i didnt think much of it at the time because i found a matching screw but now when i turn or hit a bump i can hear it rolling around (driving me insane) so now i have to do some surgery i guess... sigh...
 

·
Registered
Joined
·
203 Posts
Try tying a small magnet on a piece of kite string and fishing it out from the top. It might be that easy..... but it would save you from pulling everything apart.

Scott
 
1 - 5 of 5 Posts
Top