DODGE RAM FORUM banner

debadging

7300 Views 27 Replies 23 Participants Last post by  BEACHFRONTARTIST
Wanting to clean up my 2012 1500 big horn crew cab.
Need a little advice on removing badges. Are you using heat gun to warm them up or just prying them off? I am planning on taking the ram 1500 off of the doors and maybe moving the hemi badge up to the frontside of the front wheel-oldschool-style. Also plan on cleaning up the tailgate and leaving just the ram head in the center. thanks for any input

applebutter
1 - 1 of 1 Posts

· Registered
Joined
·
7 Posts
i tried the whole heat gun/floss thing. i personally dont think it worked to well. there was a lot of stickiness left over. for the last few i ended up using a plastic spackle tool with a rag over it and they seemed to just pop right off. i used a little carb cleaner and a rag to wipe off excess tape. worked well.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top