DODGE RAM FORUM banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
i just had my 2004.5 dodge ram diesel engine rebuilt AT 98K had a injector #4 crack and leak fuel into my oil while i was towing and seized the engine up.
while i was getting the rebuild done and a slew of new parts put on of which i will not bore you but I had installed a brand new set of 90hp bosch injectors installed at the time of the rebuild.
I am running a banks power pack system that was already on the truck.
I am getting very hard starts and towing load and half to full WOT i am popping p206 code with the truck not towing or underload don't seem to have the code pop except for the first time it popped and i wiped code never came back till i loaded my camper up. also i noticed i am gettting alot more of the diesel sound as well is this just the new injectors? do i really have a bad #6 injector? or just a bad harness connector? also i can't seem to locate the part number for the # 5 & 6 injector anyone know what that number is?

I really don't like the extra diesel sound either very very annoying but i will live with it if it's the way things are with the bigger injectors.
 

·
Registered
Joined
·
1,989 Posts
You need a new ECM it sounds like. If your fuel injectors are good and your coming up with a bad fuel injector code the ECM is most certainly trash. Take it to a good dealership and have them take a wack at it.
 
1 - 2 of 2 Posts
Top