DODGE RAM FORUM banner
1 - 4 of 4 Posts

·
Registered
Joined
·
48 Posts
Discussion Starter · #1 ·
Hey all, i have some concerns about putting a bigger set of tires on my ram, its already lifted 5 inches with a set of 35x12.50x17 coopers, and the wheels are already spaced out an inch and a half. In order to get the 35's to fit i had to cut off a good 6 inches of my running boards because they were already hitting them. Once these tires are worn out i was thinking of bumping up to a 39, im just worried about the clearance ( or lack of ) at the bottom corners of the fenders. the way it is now when i turn all the way one direction there isnt much room left, i was also thinking about putting on a 3 inch body lift as well i just want to make sure these tries are going to fit before i drop big bucks on tires.

any help is greatly apriciated
 

·
Registered
Joined
·
48 Posts
Discussion Starter · #5 ·
its not that im having bad clearance problems, the running boards that were on the truck when i got it stuck out very far in the front, i just had to trim them back to fit the 35's. they clear no problem now, im just concerned about fender clearance with a bigger tire, and i don't necessarily need to get 39's, i could go with 37's or 38's
 

·
Registered
Joined
·
48 Posts
Discussion Starter · #7 ·
ok that makes sense, now that im thinking about it i can probably squeeze a set of 37's in there with the amount of lift i have now. if i can do that i will, then thatll save me about $400 for the extra lift
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top